Need some Elna Silmic II

[Stefanoo]

Hi Folks,

i need 30 or so Elna silmic II 100V but something like 680uF or even higher capacitance would work great.
Unfortunately i can't find anything like that on ebay or other sources.
They only have 220uF rated at 100V and that's not enough.

If anybody has a stock, please let me know.


Best,
Stefano.

 

[jacco vermeulen]

Let me give you a tip, goggle searching in different languages works wonders.
But you're welcome to knock yourself out on the 1st one :http://www.google.nl/search?hl=nl&l...=result&cd=1&q=1000+uf+100v+silmic+II&spell=1
(not that i would)

 

[Stefanoo]

thank you very much.

I didn't know that.
I will keep in mind...i still don't know how to do it...but i guess is one of the option on the advanced menu.


Thank you very much for the tip.
I have appreciated it.

 

[impsick]

i would suggest looking for a different cap cause you wont find Silmic II over 220uf at 100v. Thats the biggest they go. In other words if you find a 100v over 220uf it's fake. How about Sikorel or Muse?

 

[impsick]

i fallowed that link jacco left and found a site 3rd one down listing SilmicII RFS from 330uf to 1,000uf @ 100v. It's possible Elna could have made them special order but i would be careful.

 

[Stefanoo]

yeah, i am surprised too.
Apparently it seems that elna 100V stops at 220uF.
I don't know why they have a 1000uF 100V.
Anyways i think i am going to get the 1000uF/50V which it should be fine and it's possible, at least, to find them.

I am excited to use these caps as they say are the best one.
Not sure they are better than BG ...but it's ok.

Just one question: i need to use a 220uF coupling cap on the signal path, which BG series is the best sounding for coupling purposes?

 

[dweekie]

Just one question: i need to use a 220uF coupling cap on the signal path, which BG series is the best sounding for coupling purposes? [/B]

Most would probably say the N series.