|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Parts Where to get, and how to make the best bits. PCB's, caps, transformers, etc. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
6th June 2008, 01:03 PM
|
#1 |
|
diyAudio Member
Join Date: Jun 2004
Location: ARKANSAS
|
Help with part substitute
Hello I have a pair of Radio shack Electrostat headphones that are in need on a repair.
I believe they were hooked up to a amp that was too powerful, and the 3.3R PTH has blown. It is drawn on the schematic as a resistor with a circle around it, and is about 1/2inch circle disc. I would guess that its a Varistor/MOV/Thermistior type unit, but what would I use as a modern day replacement. I have found little info on the Net about PTH resistors. Thank you for any help
__________________
If a inch of duct tape will fix it, 3 feet should fix it for life!!!! |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| what part can take the place of ST part VB408B completely | peterchen88 | Parts | 0 | 8th September 2007 05:45 AM |
| part# for spare part for CDM-1 wanted | joe | Digital Source | 5 | 20th March 2007 07:59 AM |
| Substitute for BUZ23? | Vivek | Parts | 3 | 20th March 2006 08:11 PM |
| tr substitute | dexter | Solid State | 5 | 29th April 2001 02:53 PM |
| New To Site? | Need Help? |
| Page generated in 0.06857 seconds (71.28% PHP - 28.72% MySQL) with 10 queries |
