pcb fab house

[Bengali]

Hi,

Do you know of any low cost pcb fab houses out there? US or other country.

pcb fab express, price seems reasonable, around $75-80 for 5 boards(with mask and silk)

express pcb , 3 protoboards $55+shipping(limited size, no silk/mask)

anything under $50US?

thanks

[gni]

Probably not. . . takes $$ to make small runs. . .big runs can
get the price down. . .

[theAnonymous1]

If you don't mind waiting ~3 weeks for your boards you can't beat BatchPCB for small runs. The boards are good quality and they come with solder mask and silk screen.

[janneman]

Originally posted by theAnonymous1
If you don't mind waiting ~3 weeks for your boards you can't beat BatchPCB for small runs. The boards are good quality and they come with solder mask and silk screen.

I always buy from www.olimex.com - 30 euro (45 $ ?) for 100*160 mm - about 24 square inch, so less than 2 $ per sq inch.

Air mail in Europe is 6 euro's, don't know about US. Very good product, 5 day turn-around.

Jan Didden

[theAnonymous1]

Originally posted by janneman
I always buy from www.olimex.com - 30 euro (45 $ ?) for 100*160 mm - about 24 square inch, so less than 2 $ per sq inch.

Air mail in Europe is 6 euro's, don't know about US. Very good product, 5 day turn-around.

Jan Didden

My order from BatchPCB was $59.60 (that includes shipping) for six 1.25" x 1.75" boards. It looks like I could have paid almost the same price from Olimex but fit more than 6 boards on the panel.

Oh well, BatchPCB accidentally made 18 boards for me even though I only paid for 6, so I made out OK.