wellborn labs stepped pot?

futiboho · 30th November 2007, 07:17 AM

What do you think of their attenuator: http://www.welbornelabs.com/remote.htm

Has anyone tested it? Can I run 3 units in sync, at the 3 outputs of my active xo? Is this choice a better quality compared to the rather popular DACT? What peer high grade stepped attenuator (must run 6 channels) you recommend and why? Lots of Qs Thanks.

tinitus · 30th November 2007, 11:37 AM

http://www.twistedpearaudio.com/joshuatree/jt.aspx

I dont know either of them

With 6 channels, I suppose its an active setup and not surround ... I reckon you will need seperate "buffers" fore each channel, which might be in your active xo

I dont know if this will be of any use

http://www.groundsound.com/prices.html

SRMcGee · 30th November 2007, 11:53 AM

futiboho:

Before you buy from Ron Welborne, check out recent postings regarding his service. Many people (including myself) have had problems with Welborne Labs; many of the rants are posted on audioasylum.com.

I have had good luck with Dantimax kits (http://electronics.dantimax.dk/), which could easily work for you.

Regards,
Scott

30th November 2007, 07:17 AM	#1
futiboho diyAudio Member Join Date: Oct 2004	wellborn labs stepped pot? What do you think of their attenuator: http://www.welbornelabs.com/remote.htm Has anyone tested it? Can I run 3 units in sync, at the 3 outputs of my active xo? Is this choice a better quality compared to the rather popular DACT? What peer high grade stepped attenuator (must run 6 channels) you recommend and why? Lots of Qs Thanks.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
stepped attenuator pop	Ted205	Chip Amps	17	21st July 2008 02:10 PM
Stepped attenuator	sonokeling	Parts	0	11th July 2006 09:05 AM
stepped attenuator	ivegotmono	Tubes / Valves	4	7th January 2006 02:49 PM
Stepped attenuator	Bas Horneman	Tubes / Valves	24	16th June 2004 07:18 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

30th November 2007, 11:37 AM	#2
tinitus diyAudio Moderator Join Date: Nov 2005	http://www.twistedpearaudio.com/joshuatree/jt.aspx I dont know either of them With 6 channels, I suppose its an active setup and not surround ... I reckon you will need seperate "buffers" fore each channel, which might be in your active xo I dont know if this will be of any use http://www.groundsound.com/prices.html

30th November 2007, 11:53 AM	#3
SRMcGee diyAudio Member Join Date: May 2004 Location: Wynnewood, PA	futiboho: Before you buy from Ron Welborne, check out recent postings regarding his service. Many people (including myself) have had problems with Welborne Labs; many of the rants are posted on audioasylum.com. I have had good luck with Dantimax kits (http://electronics.dantimax.dk/), which could easily work for you. Regards, Scott

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)