diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Parts (http://www.diyaudio.com/forums/parts/)
-   -   Mastering eaglepcb (http://www.diyaudio.com/forums/parts/112554-mastering-eaglepcb.html)

pete.a 25th November 2007 07:34 PM

Mastering eaglepcb
 
Could anyone help me with mastering Eagle Pcb?
Im trying but it's difficult as spare time is very limited, due to a demanding young familly.
Im trying to build a headphone amp from a schematic of Pavel Maccura design.
Made one before using copper stripboard, but it didn't perform that well! I think that was down to me and not the designer...

Ive made pcbs using various pcb layouts, as thats easy bit, not so time consuming.

sklimek 25th November 2007 07:44 PM

Hi, I have found this site: http://www.interq.or.jp/japan/se-inoue/e_eagle20.htm#2 very helpful for me when I go looking for answers sometimes. Hope it's helpful.

Stan

pinkmouse 25th November 2007 08:09 PM

A general tutorial would be difficult time-wise, but I'm more than willing to help with specific questions.

BWRX 26th November 2007 05:25 AM

As with most anything, you need time to work with it in order to learn it let alone master it.

diarav 27th November 2007 09:18 AM

Hi,

Like everyone above mentioned, it takes a while to learn Eagle PCB. For a start, you can even download the tutorial on the Eagle website.

pete.a 3rd December 2007 07:05 PM

Mastering
 
Thanks everyone , the website that was mentioned has helped somewhat. I'll now keep hacking away at eagle until next year, should of mastered it by then:D :D


All times are GMT. The time now is 03:54 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2