I have been advised to make a ground bus bar, for RCA input selector switch that I have.
Do I just use the small piece of wire like here (will be soldered to aluminium plate) and connect the grounds?
http://www.radioshack.com/product/index.jsp?productId=2102500
thanks,
Do I just use the small piece of wire like here (will be soldered to aluminium plate) and connect the grounds?
http://www.radioshack.com/product/index.jsp?productId=2102500
thanks,
Attachments
richie00boy said:A bus is just a length of wire like you say. You will have major problems soldering to aluminium though!
if plenty of flux doesn't do it, is there any other way?
gychang
kevinkr said:Use a solder lug bolted to the aluminum plate, that's the way it's done.
I'd use a bit of 14 ga copper romex wire (house wiring in plastic jacket) tin that and use that as the ground bus.
great, thanks, makes perfect sense.
gychang
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.