How large are the cores?
I've heard of people using the caps to aerosol spray-paint cans before,for smaller toroids...And ABS/PVC 'end caps' for larger ones.
Some ABS Stuff
I've heard of people using the caps to aerosol spray-paint cans before,for smaller toroids...And ABS/PVC 'end caps' for larger ones.
Some ABS Stuff
You could use a coffee or soup can. Emptied out and cleaned of course!
As far as what to use for potting, I'm pretty sure most companies use a 2 part mix. We use something at work that looks very similar to the potting in the center of Plitron toroids and it is a 2 part mix that cures fully in about 24 hours. I believe it is made by Loctite. Alternatively, you could use some kind of epoxy.
As far as what to use for potting, I'm pretty sure most companies use a 2 part mix. We use something at work that looks very similar to the potting in the center of Plitron toroids and it is a 2 part mix that cures fully in about 24 hours. I believe it is made by Loctite. Alternatively, you could use some kind of epoxy.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.