diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Parts (http://www.diyaudio.com/forums/parts/)
-   -   NAD part needed 7175 (http://www.diyaudio.com/forums/parts/111139-nad-part-needed-7175-a.html)

Tom7227 1st November 2007 10:43 PM

NAD part needed 7175
 
I am repairing an NAD 7175 reciever.

The Speaker select switch has a bad contact.

It has "A B Off A+B".

The switch is rotational, but has rectangtlar body.

Any idea guys?

Tom

Ty_Bower 16th November 2007 06:12 PM

I bought a couple parts to repair my NAD 7175PE more than a few years back. I was able to order them directly from NAD. I'm not sure how I got the number... and unfortunately, I don't seem to have it handy any more.

Do you happen to have the service manual & schematic for your 7175? I've also misplaced mine. That's probably where I scribbled the 800 number for the parts department. Anyway, I'd like to find a scanned copy of the schematic. I'd like to disconnect the main power amp, since I only use the preamp section of it anyway.

Tom7227 16th November 2007 06:28 PM

I do not have a copy of that schematic, but I did talk to NAD, they did not have the selector switchs I was looking for.

The are NLA.

But I found this same amp on Ebay for like $150. It isnt the highest end amp they made I gather...

Tom

Ty_Bower 26th March 2008 01:36 AM

I've found my service manual for the 7175PE. Let me know if you need any information from it.

unclejed613 2nd April 2008 01:06 AM

is the switch actually broken? or are the contacts open?

Tom7227 2nd April 2008 12:06 PM

The switch contacts are are open. I took apart the switch and the contacts are burned. Usually because the switch is turned while the sytem is turned up.

I have the switch bypassed.


All times are GMT. The time now is 07:26 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2