Looking for nice boxes.

[Peter Daniel]

Can you recommend a supplier of nice aluminum (preferrably cast) or steel boxes? I checked Hammond and BUD and some others, but the dimentions are not suitable. I want to use it for a PS case, for a gainclone and the inside dimensions have to be at least 4.9 X 6 X 2.75".

 

[Elkaid]

I saw this link here a few weeks ago...
(I just hope that this link isn't from one of your post !)

Anyway, here it is :
Online Metals

Check also :
Chassis
which was found in this forum too

Hope this helps
Regards

 

[Netlist]

Found this:
http://www.lincolnbinns.com/
Looks cool and shiny

/Hugo

 

[Elkaid]

I found this link for those who are interested to have some parts machined but are not equipped to work with metals.

You simply design your parts using a CAD software (there's also a simple software available for download) and then send you drawings using your computer.

However, I wonder how much could cost a drilled/holed/chamfered,brushed faceplate ?

 

[Steve Eddy]

Can you recommend a supplier of nice aluminum (preferrably cast) or steel boxes? I checked Hammond and BUD and some others, but the dimentions are not suitable. I want to use it for a PS case, for a gainclone and the inside dimensions have to be at least 4.9 X 6 X 2.75".

<a href="http://www.mouser.com">Mouser</a> sells an Eagle cast aluminum box that should do the job. It's 5 x 6.5 x 3. Part number's 400-4597.

<a href="http://www.mouser.com//index.cfm?handler=productsearch._listproductsearch&searchtype=starts+with&criteria=400-4597&searchby=PartNumber&x=13&y=13">http://www.mouser.com//index.cfm?ha...iteria=400-4597&searchby=PartNumber&x=13&y=13</a>

se

 

[gilid]

enclosures

Pomona http://www.pomonaelectronics.com/ make a nice range of extruded aluminum boxes. Ideal for PS's

 

[argo]

I have looked for similar products here too and noticed that it is very hard to find a nice molded box if you have some set dimensions in mind. And with quality finish (Rolec, Boss), they don’t come cheap as well.
Peter, with your skills and tools available, I would look some box shape extrusions. You can cut them to desired length and add end caps. Who knows, you can make some small box supplying service out of that in your spare time.
Anyway, here is a little bit different way of using aluminum-molded boxes (ala Hammond).

An externally hosted image should be here but it was not working when we last tested it.

 

[Hybrid fourdoor]

Check also :
Chassis
which was found in this forum too

How do you find out prices at this place?

Found this:
http://www.lincolnbinns.com/
Looks cool and shiny

/Hugo

Also this place had great stuff, but I couldn't seem to find a retailer here in the US. Any ideas? And it looks like you can ship directly from them, but the shipping is terrible, since it's overseas.

 

[Coulomb]

You could always make your own!

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.

I know a shameless plug for me.

Anthony

 

[uvodee]

my way

Twice I have bought used audio ( a k7 player and an amp) in a thriftstore
for $2.49 each. I took of the front and emptied the case, then spraypainted the casing's cover.
I replaced the original front with a front I made and the result is very satisfying for me.
If asked for I can post pics during and after the job.

J-P.

 

[Hybrid fourdoor]

Of course, we would love to see your work!!...this is a DIY site afterall

 

[Hybrid fourdoor]

I like this particular model. Provides a good base for a nice enclosure for amps and stuff.

Amplifier case

Maybe I could custom a front plate over at emachineshop. Thats a economic good idea!