Lite Audio MV-01 / MV-06 remote controlled volume/input selector

[roffe]

Ref: http://eshop.diyclub.biz/product_inf...roducts_id=195

Anyone have directions on how to use this, especially how all the connectors are configured?
I have got such a kit, but no documentation whatsoever.

[scooby300]

Hello Roffe

Here is a doc that i got Diyclub.biz after a few emails later.
If you use it as passive pre amp it’s very good.

I put 10 ohm resistors in R18 & R17 after a week . The volume going all the way down to zero when you change inputs 1,2,3,4,5 and when you power it up.

You could not buy the parts your self for the amount they sell it for and a free remote unit .

On power up my always starts on input 2 when you have built yours let me know what input yours start at.

[scooby300]

Here are a lot of pictures of how i put all together. The reason why it’s only got one set of inputs and outputs connectors on it . That’s all the connectors sockets that i had in stock at the time .

[scooby300]

Here i go again zip file to big split onto 7 files. But if you need hi-res pics just e-mail me 1 got 27pictures. The zips are cut down to 14 pics.

[scooby300]

part 2

[scooby300]

part 3

[scooby300]

part 4

[scooby300]

part 5

[scooby300]

part 6

[scooby300]

part 7