diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Parts (http://www.diyaudio.com/forums/parts/)
-   -   Replace 1N456A (http://www.diyaudio.com/forums/parts/109703-replace-1n456a.html)

CJ900RR 8th October 2007 09:44 AM

Replace 1N456A
 
I would like to replace National's 1N456A (low leakage diod) because I dont have them at home.

I have a bunch of others though, like:

1N4004
1N4007
1N4148
1N4935
1N4937

Im thinking 1N4148 would do the job. Is that correct or do you think I should go with one of the others?

acid_k2 8th October 2007 11:31 AM

If the use of 1N456A is not critical, 1N4148 should work.

CJ900RR 8th October 2007 12:36 PM

Well it's for a DC-servo, the one in National's AN-1192 pdf.

acid_k2 9th October 2007 07:36 AM

For DC servo, 1N4148 will work.

another solution in:

http://www.diyaudio.com/forums/showt...threadid=58149

:whazzat:


All times are GMT. The time now is 02:27 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2