Chassis suplier, machining in the UK - diyAudio
Go Back   Home > Forums > Design & Build > Parts

Parts Where to get, and how to make the best bits. PCB's, caps, transformers, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 23rd September 2007, 02:44 PM   #1
diyAudio Member
 
Join Date: Dec 2004
Question Chassis suplier, machining in the UK

I'm looking for somewhere that will supply face plates and chassis like these DIY 1712 but local to the UK.

I'm hoping with help to develop a 5 channel amp, and matching DVD / HTPC so I'm looking for someone who can also machine the fascia and silk screen.
  Reply With Quote
Old 23rd September 2007, 02:51 PM   #2
Magura is offline Magura  Denmark
diyAudio Member
 
Magura's Avatar
 
Join Date: Oct 2003
Location: Denmark, Viborg
If the one in your link fits your needs, just buy it!

You will end up paying several times as much for a custom made box, made in the UK or even nothern europe.

As for the fron panels, there are a few companies that will make a custom front panel for reasonable money (provided that you make the design yourselv with their software), as I recall at least one of them is situated in Germany, but do a search here on diyaudio, and you will sure find them.

Magura
__________________
Everything is possible....to do the impossible just takes a little while longer.
www.class-a-labs.com
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Machining of Shapal M bulgin Everything Else 2 9th January 2008 01:57 PM
Machining (was fully silver wired) Magura Everything Else 8 13th February 2004 01:36 AM
custom heatsink machining jwatts Swap Meet 50 8th January 2004 01:33 PM
Cheap custom machining services? Possum Parts 8 12th September 2002 07:45 PM
Canadian suplier of chokes. JoeBob Parts 6 22nd July 2002 04:31 PM


New To Site? Need Help?

All times are GMT. The time now is 06:39 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2