I'm a bit confused. I'm making a 2 way, 12db crossover (Linkwitz-Riley) with a crossover point @ 2500 hertz (2.5k) I know that I must reverse the tweeter leads on this particular crossover to correct for phase.
My question is this: how (and where) do I wire in the L-pad I'm using to attenuate the horn? Is it before the High Pass filter, (where the wires are still out of phase) or after I've reversed the wires?
My question is this: how (and where) do I wire in the L-pad I'm using to attenuate the horn? Is it before the High Pass filter, (where the wires are still out of phase) or after I've reversed the wires?
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.