bracket for cylinder shaped

riotubes · 15th June 2007, 09:35 PM

transformer. Got S&B TX102s approx 2 3/8" diameter. Looking for a bracket like the one in the pic....

If the pic is too small, a photo is halfway down this page

http://www.stevens-billington.co.uk/page102.htm

OzMikeH · 16th June 2007, 12:42 PM

I have seen something similar sticking out of the dashbord of a chevy.
Automotive guage cups / brackets.
buy a pair, put your volume transformers with the domed end sticking out and the wiring concealed inside the cup?
I'm pretty sure they are available in 2 1/2 inch.
a bit of rubber and your transformers will wedge in nicely.

edit:
Much more elegant than what I see there which is a capacitor clamp bolted to a piece of angle with a hole in it.

Magura · 16th June 2007, 12:50 PM

Quote:

Originally posted by OzMikeH

edit:
Much more elegant than what I see there which is a capacitor clamp bolted to a piece of angle with a hole in it.

Exactly my thoughts! If you just want what you see in the pic, go get yourself a capacitor clamp and a bathroom cup holder to go with it

Magura

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY audio Bracket?	ROBSCIX	Parts	3	8th December 2006 02:57 PM
Cylinder ESL	seraph_nyc	Planars & Exotics	11	25th February 2006 09:14 PM
Tweeter bracket for NSB	MPM	Multi-Way	7	5th January 2005 03:50 PM
Make sonotube from old propane cylinder?	Circlotron	Multi-Way	19	26th July 2004 03:58 AM
my DIY Cylinder LS and Bailey TLs	malc_hurn	Multi-Way	0	3rd January 2004 06:18 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

16th June 2007, 12:42 PM	#2
OzMikeH diyAudio Member Join Date: Mar 2007	I have seen something similar sticking out of the dashbord of a chevy. Automotive guage cups / brackets. buy a pair, put your volume transformers with the domed end sticking out and the wiring concealed inside the cup? I'm pretty sure they are available in 2 1/2 inch. a bit of rubber and your transformers will wedge in nicely. edit: Much more elegant than what I see there which is a capacitor clamp bolted to a piece of angle with a hole in it.