diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Parts (http://www.diyaudio.com/forums/parts/)
-   -   bracket for cylinder shaped (http://www.diyaudio.com/forums/parts/103615-bracket-cylinder-shaped.html)

riotubes 15th June 2007 10:35 PM

bracket for cylinder shaped
 
2 Attachment(s)
transformer. Got S&B TX102s approx 2 3/8" diameter. Looking for a bracket like the one in the pic....

If the pic is too small, a photo is halfway down this page

http://www.stevens-billington.co.uk/page102.htm

OzMikeH 16th June 2007 01:42 PM

I have seen something similar sticking out of the dashbord of a chevy.
Automotive guage cups / brackets.
buy a pair, put your volume transformers with the domed end sticking out and the wiring concealed inside the cup?
I'm pretty sure they are available in 2 1/2 inch.
a bit of rubber and your transformers will wedge in nicely.

edit:
Much more elegant than what I see there which is a capacitor clamp bolted to a piece of angle with a hole in it.

Magura 16th June 2007 01:50 PM

Quote:

Originally posted by OzMikeH

edit:
Much more elegant than what I see there which is a capacitor clamp bolted to a piece of angle with a hole in it.


Exactly my thoughts! If you just want what you see in the pic, go get yourself a capacitor clamp and a bathroom cup holder to go with it ;)

Magura :)


All times are GMT. The time now is 12:13 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2