bracket for cylinder shaped

[riotubes]

transformer. Got S&B TX102s approx 2 3/8" diameter. Looking for a bracket like the one in the pic....

If the pic is too small, a photo is halfway down this page

http://www.stevens-billington.co.uk/page102.htm

 

[OzMikeH]

I have seen something similar sticking out of the dashbord of a chevy.
Automotive guage cups / brackets.
buy a pair, put your volume transformers with the domed end sticking out and the wiring concealed inside the cup?
I'm pretty sure they are available in 2 1/2 inch.
a bit of rubber and your transformers will wedge in nicely.

edit:
Much more elegant than what I see there which is a capacitor clamp bolted to a piece of angle with a hole in it.

 

[Magura]

edit:
Much more elegant than what I see there which is a capacitor clamp bolted to a piece of angle with a hole in it.

Exactly my thoughts! If you just want what you see in the pic, go get yourself a capacitor clamp and a bathroom cup holder to go with it

Magura