Konzert Amp & Speakers Website

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
here's our latest modified power amp, 8 transistors for switching, 16 for output and 2 for drivers per channel. total of 52 transistors in one stereo amp.

IMG_7893.jpg

Is that working on your modified amp and how far stable the amp, 8 to 1 ohms?
 
If this is what you mean,
yes this is bridge on both channel, this is what we used last Dinagyang,
An externally hosted image should be here but it was not working when we last tested it.


Our latest power amp is a modefied K10, K10 using only 2 switching transistors, 7 for outputs we make it 4 for switching and 8 for outputs and change some components at the bias and driver section, we also change the buffer.
 
LOL thats already computed if you know how to compute the power needed in specific amp.
thats capacitors are enough coz the value is 22,000Uf not 10,000 Uf . do not question us about our design we know what we are doin.

any transformer will do if you know how to compute the desired power. for your amp.
 
LOL thats already computed if you know how to compute the power needed in specific amp.
thats capacitors are enough coz the value is 22,000Uf not 10,000 Uf . do not question us about our design we know what we are doin.


Your transformer is too small, not enough to handle in two amps even your caps. How much total wattage in your amp of 8 ohms load stereo?
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.