Sir audiomachine i forgot to post my email address. alexanderdurian@yahoo.com. thanks again
crell ca25
sir acd. i have also a contak in raon and he says that ca25 can hadle 6 pcs 21" crown speaker.3 pcs.each channel.kc daw sound standard yon not like ordinary power amp.just visit youtube ang find for .,,iloilo sound system you can see that mostly they are using a crell ca25 ang lexus.parehas pla tayo ng balak e .na add na kita just verify it
sir acd. i have also a contak in raon and he says that ca25 can hadle 6 pcs 21" crown speaker.3 pcs.each channel.kc daw sound standard yon not like ordinary power amp.just visit youtube ang find for .,,iloilo sound system you can see that mostly they are using a crell ca25 ang lexus.parehas pla tayo ng balak e .na add na kita just verify it
amants
sir amants, nakakuha na ako ng ca25, it cost me 52,500, malakas talaga, d mo malapitan mga subs ko. masakit sa dibdib, ang problema lng sobra ang bigat, halos d kaya ng dalawang tao. i am planning to buy another one ds december pag nakaipon, mabigat dn sa bulsa. the 15 inches neutsh you recommended, nakakuha ako ng apat and ma10 sventa to drive it. how about tweeters any recommendation? maraing salamat sir amants i hope we can meet in d future pag d2 ka na pinas, palagay ko marami akong matutunan sa u. maraming salamat ulit sir and more power.
sir amants, nakakuha na ako ng ca25, it cost me 52,500, malakas talaga, d mo malapitan mga subs ko. masakit sa dibdib, ang problema lng sobra ang bigat, halos d kaya ng dalawang tao. i am planning to buy another one ds december pag nakaipon, mabigat dn sa bulsa. the 15 inches neutsh you recommended, nakakuha ako ng apat and ma10 sventa to drive it. how about tweeters any recommendation? maraing salamat sir amants i hope we can meet in d future pag d2 ka na pinas, palagay ko marami akong matutunan sa u. maraming salamat ulit sir and more power.
acd,
sir, can also i ask the contact deteils of that at raon store? can how much the cost of your dual magnet crown speaker that u used foryour sub? pls.email me. rhodrich@hotmail.com
sir, can also i ask the contact deteils of that at raon store? can how much the cost of your dual magnet crown speaker that u used foryour sub? pls.email me. rhodrich@hotmail.com
rhodrich
sir the name of the store is Raygin Lights and Sounds, 723 puyat st., Quiapo manila. tel. no. 733-9420. look for gelynn kung bibili ka sa kanila. mababa talaga sila magpresyo. they can give you up to 15% discount from the original price. puede pa sa kanila ung ibalik items na nabili mo if you're not contented wd the performance. gud luck sir, try visit their store and compare it wd other suppliers.lahat ng gamit ko binili ko sa kanila
sir the name of the store is Raygin Lights and Sounds, 723 puyat st., Quiapo manila. tel. no. 733-9420. look for gelynn kung bibili ka sa kanila. mababa talaga sila magpresyo. they can give you up to 15% discount from the original price. puede pa sa kanila ung ibalik items na nabili mo if you're not contented wd the performance. gud luck sir, try visit their store and compare it wd other suppliers.lahat ng gamit ko binili ko sa kanila
sir amants ung mga cab ng mga subs ko ay ginawa lng namin, wala kaming pinagkopyahan pero ok na rin, sir amants favor naman can you send me the specs of sub zero and L36 cabs. gusto kong gumawa as per specification, baka mas maganda ang response ng subs ko. sa sept. 26 ka pa pala mamili, tex mo ako ,i might also be in manila on that date. antayin mo lng mga pic ng set up ko thru email. I'm having a hard time to do it. d pa tayo masyadong marunong sa computer. thanks sir amants. have a nice day
Last edited:
sir gud am, crown nabili ko na subs , ung 4 inches lng ang voice coil nya, gusto kong bumili ng tnt. k lng ba ung crown d2 sa wsx na cab? mukhang maganda nga itong wsx na cab, medyo complicated nga lng construction niya. ung mga mids ko sir amants, kailangang bang lagyan ng capacitor/filter, kc naobserved ko parang may low signal na lumalabas kahit it passes thru crossover. sir amants ung high ko ang binili ko ung sa concert PD 500. masyadong mahal ung neutsh. k naman kahit papano ung performance niya.
Neusch PD1850 in WSX cabinet
HI! audiomachines im new here,
IM interested with neusch pd1850 from kolin. I just would like to confirm if this woofer will work in Martin WSX cabinet and how about its durability and reliability would it last? I have read that it was a clone or an immitation of void V18-1000 was it true? have you tried it personally in your WSX cab? how do they sound?
pls. email me sndfactor@yahoo.com for the results or graphs if any...or better if you had the T/S Parameter of this driver I would appreciate it.
It would be helpful also if you gave me an advice on what suitable amp for this cab... martin WSX loaded with Neusch pd1850...
HI! audiomachines im new here,
IM interested with neusch pd1850 from kolin. I just would like to confirm if this woofer will work in Martin WSX cabinet and how about its durability and reliability would it last? I have read that it was a clone or an immitation of void V18-1000 was it true? have you tried it personally in your WSX cab? how do they sound?
pls. email me sndfactor@yahoo.com for the results or graphs if any...or better if you had the T/S Parameter of this driver I would appreciate it.
It would be helpful also if you gave me an advice on what suitable amp for this cab... martin WSX loaded with Neusch pd1850...
@audiomachines AB36, Sub Zero, and WSX plans pls
can I have it also sir? plsssssssssssssss ..... sndfactor@yahoo.com and also wil crown pro 1816pa will work in WSX? what is the best driver for WSX bin that is not too expensive? only neusch pd1850 and crown 1816pa is available here... help pls. I have 2 WSX custom made here and I want the best driver on it with the best performance... sir audiomachines I know that your the man that we can depend on... any opinion sir?
can I have it also sir? plsssssssssssssss ..... sndfactor@yahoo.com and also wil crown pro 1816pa will work in WSX? what is the best driver for WSX bin that is not too expensive? only neusch pd1850 and crown 1816pa is available here... help pls. I have 2 WSX custom made here and I want the best driver on it with the best performance... sir audiomachines I know that your the man that we can depend on... any opinion sir?
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.