Konzert Amp & Speakers Website

[gooseneck]

To sir Tony,

I just want to post the schematic...but i cannot do it ...i think there's something wrong with my computer...i will try again to post it...thanks sit tony for the advice...

 

[TonyTecson]

Here's my DIy 3-way active X-over fitted in Aluminum chassis, from Silicon chip.
Silicon Chip Online - Active 3-Way Crossover for Loud Speaker Systems
i'm just adding frequency adjust controls

skyjam, nice chassis there, is that a 1U? diy you make it yourself? where did you source your chassis from? thanks....

 

[TonyTecson]

To sir Tony,

I just want to post the schematic...but i cannot do it ...i think there's something wrong with my computer...i will try again to post it...thanks sit tony for the advice...

no prob.....you can also email it to me and i will post it here....

 

[engel dela pena]

sir tony,
is it ok to post sir dacuycoy version of leach amp?hope sir dacuycoy would agree.
it is already posted @ e labs,hope it's ok to post it here

 

[TonyTecson]

i have no problem with that, but i think that you should ask permission from him...

 

[Skyjham]

crossover

skyjam, nice chassis there, is that a 1U? diy you make it yourself? where did you source your chassis from? thanks....

that's only an ordinary 1U aluminum chassis sir tony, available in electronics store here,.maybe it is also available in your area

 

[urbanista]

SOVEREIGN 18-500

Hi,

I just want to ask if i could use this model of FANE Speaker (SOVEREIGN 18-500) for Bass Applications and also i am using a Sub Scoop (EV T18) type of Bass Cab.

Thanks

Fane International Ltd Loud Speakers

 

[engel dela pena]

ok i will wait till sir dacuycoy say's go or no go

 

[engel dela pena]

skyjham,
can you share how to modify silicon chip x-over how to add frequency pots,input/output pots.

 

[TonyTecson]

@skyjam, engel dela pena, can we continue this over at elab phils.? more pinoys will benefit....

engel, you are welcome to chime in on the classg, class h discussions going on....

 

[andrewlebon]

hi tony
greetings can you please share link to elab phill
warm regards
andrew lebon

 

[TonyTecson]

hi tony
greetings can you please share link to elab phill
warm regards
andrew lebon

here you go:

The Philippine Electronics and Technology Forum - Index

be warned, the site is not a purely English speaking site.....

 

[andrewlebon]

thanks

hi tony
thanks for leading to a great site hows the westrack 560 watts in 8 ohms
is it stable need for pa duty
warm regards
andrew lebon

 

[1SaGing5]

how much does a konzert 12" dvc driver cost ?? aNY ideas?


cheers IEE

 

[engel dela pena]

sir jojo,
this is for 21'' plan
how about for18'',can you share plans?
and does the original v. driver use 2 x 21'',and 2 x 18''
is this a modified ver. using 1 x 18'',or the 1 x 21''

 

[engel dela pena]

stock in two of this modified ver looks like this

 

[engel dela pena]

can somebody please share how deep the jack hammer series speaker,jh186/185
measurement from magnet to edge in inches?

 

[dj_jojo_md]

sir jojo,
this is for 21'' plan
how about for18'',can you share plans?
and does the original v. driver use 2 x 21'',and 2 x 18''
is this a modified ver. using 1 x 18'',or the 1 x 21''

Actually this a TSW24...this for 24" driver..

the below are different version of TSW118...

 

[gooseneck]

Sir tony...good morning...can you pls. give me your email address...?

tnx...benny

 

[gooseneck]

To Skyjam...sir good days...can you please show me how did you put the frequency adjust control in the circuit...?

tnx... benny