diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   PA Systems (http://www.diyaudio.com/forums/pa-systems/)
-   -   Konzert Amp & Speakers Website (http://www.diyaudio.com/forums/pa-systems/74642-konzert-amp-speakers-website.html)

audiomachines 27th July 2006 06:45 AM

hi sir,

these 15''s starvox were nearly 30 years old, IMHO they were made in a time were manufacturer's know what they are doing, today sir, how many local manufacturers publish their drivers T/S parameters? response plot? some of my collegues in the sound system business (mostly audiophiles,older and more experienced than me) say that it is one of the better (not the best) loudspeaker made locally, and I agree.
very narrow winding gap for max efficiency, thick top plate so that the voice coil will be kept cool and can withstand more power, very light cone, flat spider (not the cup type) to minimise voice coil rubbing during high excursion. sure
it doesn't perform as well as the JBL's, ElectroVoice (my favorite), Emminence, Celestion, Wharfedale etc. But I believe it is one of the better made speaker locally, something we Filipinos can be proud of.

good day

ps. maybe we should start another thread sir.:D

clem_o 28th July 2006 02:18 AM

Hey, I wish they still made things like that today! :-)

Cheers

audiomachines 30th July 2006 09:45 AM

2 Attachment(s)
hello guys,

amen to that sir,amen. how i wish too... here are some pro audio amps from china. Konzert K2 and the subwoofer pounder (or toaster:D ) the Konzert H3000, can blow your ever famous Crown 1860 dual magnet
(stack magnets) 18in. speakers with ease. Crown 1860 has a 4 in. 4 layer voice coil, wound with a #25 magnet wire!

good day :)

AJT 30th July 2006 12:00 PM

hey audiomachines,

do youhave pictures of its innards? i bet it is QSC clone just like the Kinetics line of amps sold locally....

audiomachines 30th July 2006 03:10 PM

hello,

no sir, but i had repair some of them, Konzert k2,k4,k6,k8,and the power plant of them all k10. The k series is a linear dual differential input, 3 deep darlington ckt on the driver and output stage, basically a very low bias class b perhaps. (the heatsink barely gets warm at idle and yet k6 and k10 has a rail voltage of +/- 120V and +/-140V respectively) while the h3000 is a class H design with a rail voltage of +/-70V for the lower supply and +/-140V for the high supply, does not use mosfet to switch rail but instead it uses bipolar tranies, similar to the Crest Audio CA Series (i think), sir i think you are referring to the Kinetic CS 1000? yes sir it has a topology just like the QSC's, I had 4 units a long time ago.

good day :D

clem_o 31st July 2006 12:28 AM

Any common faults in those you serviced?

Thanks for the info!

Cheers

AJT 31st July 2006 02:44 AM

hi,

how about transformer size? how heavy are they? torroid or ei's?

thanks..

for pa work, class b is not bad....:D

AJT 31st July 2006 03:18 AM

oh, btw, i know MGR is developing some class H power amps, you may pm him in case you are interested...

MGR 31st July 2006 03:36 AM

Hello guys
The konzert K series amps K1,K2,K6 etc is made by the chinese company Aolong.In china they call it M1,M2,etc.Also the H3000.Hope this helps.

Regards MGR

audiomachines 31st July 2006 06:28 AM

2 Attachment(s)
hello again,

I forgot to mention that there would be a trade show exhibit at World Trade Center this coming August 9-12, 6th PALMM-Philippines, admission is free. Thanks;)


All times are GMT. The time now is 02:39 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2