I'm trying to repair my Peavey PV6 USB mixer. There is static in the left channel only, accompanied by very slight hum that can be seen on the led meter. I can see it on the scope on pin 14 of U23. I've swapped out some of the caps, C231 & C232 were swollen, and checked some of the resistors.
I tried to upload schematic, but the file was over the limit.
Thanks,
I tried to upload schematic, but the file was over the limit.
Thanks,
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.