15" RCF bass driver - cause of ticking sound? - Page 3

ClackS02 · 19th March 2013, 03:54 PM

we shouldnt laugh about speakers catching fire.... its a worldwide problem that should be taked seriously!

I lost mine a while back and things will never be the same :'(

ClackS02 · 19th March 2013, 03:56 PM

Quote:

Originally Posted by capslock

(two pics of the toasted VC and one brand new black P-audio)

The smell is usually rather exotic!

mattlong8 · 19th March 2013, 04:24 PM

Didn't read the whole thread but my guess would be the lead wires are impacting the cone. Try to route them more to the side or closer to the spider.

-Matt

ClackS02 · 20th March 2013, 07:50 AM

Quote:

Originally Posted by mattlong8

Didn't read the whole thread but my guess would be the lead wires are impacting the cone. Try to route them more to the side or closer to the spider.

-Matt

Aren't these lead wires threaded into the spider ?

mattlong8 · 20th March 2013, 08:14 AM

I don't think RFC does that. I've only reconed one though.
-Matt

ClackS02 · 20th March 2013, 08:51 AM

This might be worth checking out then ! Also, check out the enclosure! any air leaks or something loose will cause a noise

John Cory · 17th May 2013, 08:23 PM

The only way you can test these accurately is with a signal generator and an impedance meter(such as the "Marconi Measuring Bridge"

19th March 2013, 03:54 PM	#21
ClackS02 diyAudio Member Join Date: Mar 2013 Location: Kent, UK	we shouldnt laugh about speakers catching fire.... its a worldwide problem that should be taked seriously! I lost mine a while back and things will never be the same :'( __________________ -Steve C -DubRoach Production

20th March 2013, 08:51 AM	#26
ClackS02 diyAudio Member Join Date: Mar 2013 Location: Kent, UK	This might be worth checking out then ! Also, check out the enclosure! any air leaks or something loose will cause a noise __________________ -Steve C -DubRoach Production

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
15" tapped horn with RCF	wood1y	Subwoofers	126	9th August 2013 06:21 PM
Can someone dirct me to a tutorial about designing a cabinet for a 15" bass driver?	pete1729	Multi-Way	10	27th February 2013 01:03 PM
15" Bass Driver for OB (40-200Hz)	OTMOPO3OK	Subwoofers	60	12th September 2007 08:21 PM
Ticking sound from bass driver	Lexluthor	Multi-Way	1	26th September 2006 09:37 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

19th March 2013, 04:24 PM	#23
mattlong8 diyAudio Member Join Date: May 2011 Location: San Francisco, California	Didn't read the whole thread but my guess would be the lead wires are impacting the cone. Try to route them more to the side or closer to the spider. -Matt

20th March 2013, 08:14 AM	#25
mattlong8 diyAudio Member Join Date: May 2011 Location: San Francisco, California	I don't think RFC does that. I've only reconed one though. -Matt

17th May 2013, 08:23 PM	#27
John Cory diyAudio Member Join Date: Apr 2013 Location: Port Elizabeth	The only way you can test these accurately is with a signal generator and an impedance meter(such as the "Marconi Measuring Bridge"