15" RCF bass driver - cause of ticking sound?

[ClackS02]

we shouldnt laugh about speakers catching fire.... its a worldwide problem that should be taked seriously!

I lost mine a while back and things will never be the same :'(

 

[ClackS02]

(two pics of the toasted VC and one brand new black P-audio)

The smell is usually rather exotic!

 

[mattlong8]

Didn't read the whole thread but my guess would be the lead wires are impacting the cone. Try to route them more to the side or closer to the spider.

-Matt

 

[ClackS02]

Didn't read the whole thread but my guess would be the lead wires are impacting the cone. Try to route them more to the side or closer to the spider.

-Matt

Aren't these lead wires threaded into the spider ?

 

[mattlong8]

I don't think RFC does that. I've only reconed one though.
-Matt

 

[ClackS02]

This might be worth checking out then ! Also, check out the enclosure! any air leaks or something loose will cause a noise

 

[John Cory]

The only way you can test these accurately is with a signal generator and an impedance meter(such as the "Marconi Measuring Bridge"