diyAudio (
-   PA Systems (
-   -   How to get the high compression driver out of a Renkus Heinz CT8-DF (

pureweb 25th February 2013 09:11 PM

How to get the high compression driver out of a Renkus Heinz CT8-DF
Hello, sorry if this is in the wrong category. I have some older Renkus Heinz speakers, CT8-DF and two of them need to be repaired. I can't seem to figure out how to disassemble the cabinet. I have searched for schematics of this cabinet but can't seem to find anything helpful.

The other issue is the replacement part itself. I am told it is the high frequency driver and you can tell some distortion at volume which seems to support this.

Thanks for helping a new guy out!

Enzo 26th February 2013 12:00 AM

I have no experience with this series, but one place to start would be with R-H themselves. Here is their support page.

Renkus-Heinz Inc. - Pro Audio

The worst that could happen is they ignore you, but it costs nothing to ask for help, and they might tell you exactly what you need.

pureweb 26th February 2013 01:11 AM

Called RH
I called the folks over at Renkus Heinz and they guided me through removing the horn assembly. Also, they hooked me up with the replacement part and told me where to get it. So that is pretty cool.

If anyone cares to know:
cd3302-8a (just the diaphragm)
cdt-2 (the entire assembly)

Enzo 26th February 2013 02:33 AM


ClackS02 12th March 2013 02:46 PM

Can you upload some pictures of the unit, sounds fairly interesting!!!

All times are GMT. The time now is 11:43 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2