Hello, sorry if this is in the wrong category. I have some older Renkus Heinz speakers, CT8-DF and two of them need to be repaired. I can't seem to figure out how to disassemble the cabinet. I have searched for schematics of this cabinet but can't seem to find anything helpful.
The other issue is the replacement part itself. I am told it is the high frequency driver and you can tell some distortion at volume which seems to support this.
Thanks for helping a new guy out!
The other issue is the replacement part itself. I am told it is the high frequency driver and you can tell some distortion at volume which seems to support this.
Thanks for helping a new guy out!
I have no experience with this series, but one place to start would be with R-H themselves. Here is their support page.
Renkus-Heinz Inc. - Pro Audio
The worst that could happen is they ignore you, but it costs nothing to ask for help, and they might tell you exactly what you need.
Renkus-Heinz Inc. - Pro Audio
The worst that could happen is they ignore you, but it costs nothing to ask for help, and they might tell you exactly what you need.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.