Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

PA Systems A forum for discussion of all parts of a sound reinforcement or DJ system: loudspeakers, mixers (desks) etc.

My New PA Setup w/ ServODrive
My New PA Setup w/ ServODrive
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 31st December 2012, 09:00 PM   #1
FairfaxStu is offline FairfaxStu  United States
diyAudio Member
 
Join Date: Feb 2010
Location: Fairfax, VA
Default My New PA Setup w/ ServODrive

Folks:

I know that most everybody here posts with their problems so I wanted to take this opportunity to share with you my success story which has been a long time in the making.

Back in 2005, I purchased a BassTech 7 module from Europe. It was in good condition and at a good price. I then spent the next several years (on and off) searching for the cabinet to put it in. Luckily, in May of this year, I was able to connect with the manufacturers and get a "new" old stock cabinet. After some slight mods to the cabinet to make the module fit properly, I was good to go.

I then picked up a Behringer PMP4000 Mixer and some Peavey PR12's. I coupled those up with a Rane AC23 crossover and Crown DC300A amplifier. After some tweaking the sound is excellent. It even rivals my main system consisting of Klipsch and JBL speakers with Adcom and Crown power.

I have not yet had the opportunity to take it outdoors but I suspect the results will be good. That ServODrive is a monster with 600 watts on it.

-Stu
  Reply With Quote
Old 31st December 2012, 09:17 PM   #2
bear is offline bear
expert in tautology
diyAudio Member
 
bear's Avatar
 
Join Date: Apr 2002
Location: New York State USA
My New PA Setup w/ ServODrive
pix?
__________________
_-_-bear
http://www.bearlabs.com -- Btw, I don't actually know anything, FYI -- every once in a while I say something that makes sense... ]
  Reply With Quote
Old 31st December 2012, 11:35 PM   #3
FairfaxStu is offline FairfaxStu  United States
diyAudio Member
 
Join Date: Feb 2010
Location: Fairfax, VA
I tried and hope this works. See attached pics.
Attached Images
File Type: jpg AmpXover.jpg (241.9 KB, 672 views)
File Type: jpg Mixer.jpg (282.0 KB, 647 views)
File Type: jpg Overall.jpg (203.7 KB, 637 views)
File Type: jpg Servodrive.jpg (205.0 KB, 653 views)
  Reply With Quote
Old 2nd January 2013, 09:28 PM   #4
tomi is offline tomi  Wales
diyAudio Member
 
Join Date: Dec 2004
Location: The North
That DC300 is a bit of a classic!
I'm not familiar with the sub though - does the name ServODrive imply that it's servo-controled? It's an interesting idea and I'm sure q few of us would be interested in hearing about it if so.
__________________
Don't Fear the Repair
  Reply With Quote
Old 3rd January 2013, 06:41 PM   #5
FairfaxStu is offline FairfaxStu  United States
diyAudio Member
 
Join Date: Feb 2010
Location: Fairfax, VA
Quote:
Originally Posted by tomi View Post
I'm not familiar with the sub though - does the name ServODrive imply that it's servo-controled? It's an interesting idea and I'm sure q few of us would be interested in hearing about it if so.
Actually, the ServODrive is not servo controlled, but rather is driven by a servo motor instead of conventional voicecoils and magnets. I have attached a pic of the Basstech 7 module. The blue thing in the back is the servo motor.
Attached Images
File Type: jpg servodrive.jpg (176.8 KB, 613 views)
  Reply With Quote
Old 4th January 2013, 12:41 AM   #6
tomi is offline tomi  Wales
diyAudio Member
 
Join Date: Dec 2004
Location: The North
Thanks, most intriguing!
__________________
Don't Fear the Repair
  Reply With Quote
Old 4th January 2013, 10:05 AM   #7
JonSnell Electronic is offline JonSnell Electronic  United Kingdom
diyAudio Member
 
JonSnell Electronic's Avatar
 
Join Date: Dec 2012
Location: The Jurassic Coast, England. GB
That ServoDrive unit is a classic as well as the Crown Amp. (I repaired a DC300A yesterday!)
They were used in cinema situations for Sub Bass applications using a pair of 18" steel cones, horizontally opposed and built into a hardwood or ceramic cabinet.
A bit of a pain to set up the null point on some models but useful up to 120Hz.
  Reply With Quote
Old 4th January 2013, 11:35 AM   #8
JMFahey is offline JMFahey  Argentina
diyAudio Member
 
JMFahey's Avatar
 
Join Date: Mar 2009
Location: Buenos Aires - Argentina
Wow, that's weird !!
Does it reproduce anything above, say, 1 Hz?
And only half joking here.
Mass and rotational inertia must be murderous.
  Reply With Quote
Old 4th January 2013, 12:23 PM   #9
FairfaxStu is offline FairfaxStu  United States
diyAudio Member
 
Join Date: Feb 2010
Location: Fairfax, VA
Quote:
Originally Posted by JMFahey View Post
Wow, that's weird !!
Does it reproduce anything above, say, 1 Hz?
And only half joking here.
Mass and rotational inertia must be murderous.
Here are the specs:
http://phy6.net/downloads/electronic.../Basstech7.pdf

I currently have the Rane crossoving it over at 80Hz and it sounds amazing!
  Reply With Quote
Old 4th January 2013, 12:48 PM   #10
JMFahey is offline JMFahey  Argentina
diyAudio Member
 
JMFahey's Avatar
 
Join Date: Mar 2009
Location: Buenos Aires - Argentina
Very interesting, I'm tempted to cook my own, just to see (hear) what happens.
Upper frequency limit looks too good to be true, but experimenting is king.
Thanks for the idea
  Reply With Quote

Reply


My New PA Setup w/ ServODriveHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
DIY PA Speakers Setup (Line Array) apexaudio PA Systems 194 7th July 2017 05:11 PM
ServoDrive Subwoofer??!? mulletdude Subwoofers 49 20th January 2014 02:35 PM
APEX PA Setup apexaudio Vendor's Bazaar 6 21st December 2013 09:19 PM


New To Site? Need Help?

All times are GMT. The time now is 06:00 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki