Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

PA Systems A forum for discussion of all parts of a sound reinforcement or DJ system: loudspeakers, mixers (desks) etc.

old carlsbro cd 8 2 mosfet loose shield plate, only one mounting point
old carlsbro cd 8 2 mosfet loose shield plate, only one mounting point
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 30th October 2012, 03:13 PM   #1
benaround3 is offline benaround3  United Kingdom
diyAudio Member
 
Join Date: Feb 2006
Default old carlsbro cd 8 2 mosfet loose shield plate, only one mounting point

Hello

I opened up this powered mixer to fix some dry joints and loose connections and found that the sheet steel shield plate was completely unsecured, apart from the earth tag. It looked as though the plate had at some time been secured by one corner to a mounting point on the top corner of the side jack plug pcb but I could not even find any other mount points although there were holes drilled in each corner of the plate. If the plate had been mounted to that one corner only it would cause stress and flexing to the pcb and repeat of the dry joints problem, but that only explains why it was left completely unsecured and floating inside the cabinet.

Could anyone explain what has happened? Am I missing seeing the other three mount points or could this be an incomplete mod? What can I do to make it safe? It seems to be the correct plate shapewise, when the top panel is laid face down the plate lies snugly and rests on top of the other pcbs but I can see nowhere to screw down through the other three holes.

I contacted Carlsbro but they no longer have recordes of old units since they nearly went bust and got rescued.
  Reply With Quote

Reply


old carlsbro cd 8 2 mosfet loose shield plate, only one mounting pointHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Mounting the driver and plate amp qguy Subwoofers 15 30th June 2011 06:18 PM
Plate curves or Op Point for 6KN8? bjaensch Tubes / Valves 5 11th June 2011 05:59 AM
loose plate caps, hi temp glue??? roline Tubes / Valves 9 4th January 2011 08:14 PM
Mounting plate for Systemdek? MTB musicman Analogue Source 2 25th October 2006 11:11 AM
mounting plate for transformer dine1967 Parts 5 22nd April 2005 03:46 PM


New To Site? Need Help?

All times are GMT. The time now is 07:03 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki