diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   PA Systems (http://www.diyaudio.com/forums/pa-systems/)
-   -   Subwoofer enclosure diy (http://www.diyaudio.com/forums/pa-systems/222001-subwoofer-enclosure-diy.html)

BeaverNation 22nd October 2012 09:55 AM

Subwoofer enclosure diy
 
I have 2 EAW LC-1533 15" woofers that i need to build enclosure for. I couldn't find the specs any where. Currently i'm using a pair of cerwin vega LE-36PE 18" folded horn. I like to run the EAW with the CV in large venue, and EAW by itself in small venue. What is the best design? Port or seal box? How big?

dangus 24th October 2012 09:20 AM

Those speakers might have been made by Eminence for EAW. See if there's an Eminence driver that resembles them.

Ported, unless you only need them for midbass. Best bet would be to copy the enclosure that EAW used them in (internal volume, port dimensions). Otherwise, you really need to measure the TS parameters. Published specs are often wrong.

Maybe a tapped horn, if the parameters are suitable.


All times are GMT. The time now is 12:27 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2