Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

PA Systems A forum for discussion of all parts of a sound reinforcement or DJ system: loudspeakers, mixers (desks) etc.

Still need assistance designing a midbass cab
Still need assistance designing a midbass cab
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 17th January 2013, 11:54 PM   #91
chris661 is offline chris661  United Kingdom
diyAudio Member
 
chris661's Avatar
 
Join Date: Feb 2008
Location: Sheffield
Quote:
Originally Posted by klampykixx View Post
Is the general consensus saying yes to having a wadding or sound absorbtion inside a mid cab? Mine are empty and apart so was thinking should i be putting anything inside before rebuilding them?
You'll be getting less out the ports, and restricting ventilation around the magnet (if you're really hammering them), so I'd advise against it for high-power use.

Chris
  Reply With Quote
Old 19th January 2013, 01:34 AM   #92
klampykixx is offline klampykixx  Australia
diyAudio Member
 
Join Date: Dec 2010
Location: Coffs Harbour NSW 2450
ok, im just waiting on grilles now to call them done, but i glued a layer of accoustic(eggcarton) foam to the back, lower 1/3 of the cab. and also wrapped the tweeter horn in polycroft wadding. along with the new crossovers and new D220ti CD they sound very much full and clean. im yet to crank them up, but i can already hear that they sound better to me. im expecting that as the volume climbs, they will get more and more impressive until their SPL limit of course.
__________________
  Reply With Quote

Reply


Still need assistance designing a midbass cabHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Could the SA-310 bass cab be used for a bass and guitar cab? JThompson56 Instruments and Amps 14 17th August 2012 08:50 PM
Thiele guitar cab vs. ported guitar cab qingcong Multi-Way 2 9th January 2011 03:32 PM
what sounds best . . . Low Qts in small cab or higher Qts in bigger cab mikelm Subwoofers 18 15th July 2009 10:46 AM
need help for a designing an extra small bass cab dighom Multi-Way 7 23rd January 2008 01:05 PM
Designing a bass cab Afroghost Instruments and Amps 0 1st May 2005 08:37 AM


New To Site? Need Help?

All times are GMT. The time now is 01:19 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki