I.D. this amp please if you can

oublie · 23rd May 2012, 11:28 PM

Hi just picked this up from ebay - fairly cheap, it hasn't arrived yet but i thought i would take a risk and buy it anyway. The trouble is I have absolutely no clue what make or model

I know it says behringer on the sticker but it may just have been stuck on.

Any help much appreciated.

oublie · 28th May 2012, 07:14 PM

Found it! the amp arrived today and it's not a behringer or a bose (sticker on front) i opened it up to inspect the innards as one of he speaker jacks needs replacing and it's actually either a Bell 4022 or 8022 (hard to tell) so basically a 150 pc or 250 pc 8ohm pa amp. So its not exactly the find of the century. Has anyone ever used them in the past?

http://www.bell-audio.de/PAamps.pdf

hunter audio · 29th May 2012, 08:48 AM

It could be amps used by bose for custom installations in the 90 s for small clubs where they used 802 tops and nexxo bass bins along with 302 s , some heavy amps (mostly made in Germany with bose stickers) were used to power the nexxo / 320 s

Please note at that time many Bose dealers were taking on custom installations themselves . i.e. the customer insisted bose installation (due to bose marketing) the (bose) dealer provided the euphoria of a custom bose installation by using a mix bag of all type of gear .

oublie · 1st June 2012, 09:26 PM

thanks for the info hunter, i'll get it rigged up this weekend and see what i bought (drunk ebay purchases you know it makes sense

)

28th May 2012, 07:14 PM	#2
oublie diyAudio Member Join Date: May 2009 Location: Northern Ireland	Found it! the amp arrived today and it's not a behringer or a bose (sticker on front) i opened it up to inspect the innards as one of he speaker jacks needs replacing and it's actually either a Bell 4022 or 8022 (hard to tell) so basically a 150 pc or 250 pc 8ohm pa amp. So its not exactly the find of the century. Has anyone ever used them in the past? http://www.bell-audio.de/PAamps.pdf __________________ There are 10 types of people in the world: Those who understand binary, and those who don't...

1st June 2012, 09:26 PM	#4
oublie diyAudio Member Join Date: May 2009 Location: Northern Ireland	thanks for the info hunter, i'll get it rigged up this weekend and see what i bought (drunk ebay purchases you know it makes sense ) __________________ There are 10 types of people in the world: Those who understand binary, and those who don't...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS- Twisted Pear Buffalo 32S Board & System New & Unused	secretriches	Swap Meet	1	10th August 2009 02:17 PM
Modify & build out (2) Western Electric 300B / 2A3 Hammond monoblock amps & UTC LS-5	quality sound	Tubes / Valves	0	9th May 2009 03:59 PM
Krell KSA 80 bias & dc offset check & adjust procedure	Clouseaupte	Solid State	3	9th August 2007 09:39 AM
DIY-AMP <ZAS> Low THD & IM high bandwith	murphy	Solid State	18	30th December 2005 10:28 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

29th May 2012, 08:48 AM	#3
hunter audio diyAudio Member Join Date: Dec 2003 Location: Mumbai	It could be amps used by bose for custom installations in the 90 s for small clubs where they used 802 tops and nexxo bass bins along with 302 s , some heavy amps (mostly made in Germany with bose stickers) were used to power the nexxo / 320 s Please note at that time many Bose dealers were taking on custom installations themselves . i.e. the customer insisted bose installation (due to bose marketing) the (bose) dealer provided the euphoria of a custom bose installation by using a mix bag of all type of gear .