Behringer EUROPOWER PMP518M-need schematic - diyAudio
Go Back   Home > Forums > Live Sound > PA Systems

PA Systems A forum for discussion of all parts of a sound reinforcement or DJ system: loudspeakers, mixers (desks) etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 30th November 2011, 08:42 PM   #1
ID_ is offline ID_  Slovenia
diyAudio Member
 
Join Date: Jun 2006
Default Behringer EUROPOWER PMP518M-need schematic

Hello.

If someone happens to have the schematic for the EUROPOWER PMP518M, power mixer from Behringer and is willing to share it to me, I would be very greatful. I need the schematic for the power amplifier. I'm missing some traces on PCB so the repair without the schematic is nearly impossible! Thank you in advance!
  Reply With Quote
Old 1st December 2011, 12:13 AM   #2
Enzo is offline Enzo  United States
diyAudio Member
 
Join Date: Sep 2004
Location: Lansing, Michigan
Is the little power amp the LPA1180?

I can't provide the schematic, but other Behringer models also use it, so when using Google to search for the schematics, you could also look for PMH518, BXL1800, K1800, and the LPA1180 itself.

One place that has a number of Behringer schematics online is Electrotanya.
  Reply With Quote
Old 1st December 2011, 07:52 AM   #3
ID_ is offline ID_  Slovenia
diyAudio Member
 
Join Date: Jun 2006
Exactly that module! I'll look at electrotanya and google!

Edit: I found it! Thank you!

Last edited by ID_; 1st December 2011 at 08:03 AM.
  Reply With Quote
Old 1st December 2011, 11:37 PM   #4
Enzo is offline Enzo  United States
diyAudio Member
 
Join Date: Sep 2004
Location: Lansing, Michigan
And yes, it is a pain to remove the two power resistors to get at the screw through the transistor tab.
  Reply With Quote
Old 2nd December 2011, 12:39 AM   #5
ID_ is offline ID_  Slovenia
diyAudio Member
 
Join Date: Jun 2006
I did not have problems with theese resistors. They can be bent aside, to get the screwdriver between them. They are radial type 5W resistor mounted on some longer leads. The real pain are copper traces. If you overheat the pad just a little, good bye solder pad! And I have to remove 4 transistors, 2 diodes (15V zeners are baked) and 4 resistors. I managed to replace all resistors and make contacts with broken copper traces. Now I only have to get 15V zeners and IRFP140/9140. Then hopefully the amp will work!
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Behringer europower pmh1000 blown psu laserlight Power Supplies 10 25th October 2012 06:53 PM
Wanted: Behringer Europower EP2500 Schematics steve_v Solid State 8 9th September 2012 03:38 PM
Looking for Behringer PMH800S schematic ampman70 Solid State 0 9th May 2011 06:36 PM
Behringer Europower EP1500 sterjess Solid State 1 27th March 2010 08:41 AM
Behringer EuroPower 1500 review longblock454 Solid State 7 24th April 2008 08:37 AM


New To Site? Need Help?

All times are GMT. The time now is 12:29 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2