DIY PA Speakers Setup (Line Array)

[apexaudio]

Compact quasi horn.

 

[apexaudio]

Dual 18 inch quasi horn.

 

[apexaudio]

C15 mid bass

 

[rohin]

need help

C15 mid bass

sir i need 15 inch top speaker seal cabinet design for single and dual speaker and 24 db bass crossover for 18 inch bass reflex enclouser.thanks

 

[emilvv]

Hello ....

Hello,

Please, tell us how to setup the limit to 20 W tweeter for this schematic ...

http://www.diyaudio.com/forums/atta...-x-over-mosfet-protect-not-compress-peaks.jpg

http://www.diyaudio.com/forums/pa-systems/174053-diy-pa-speakers-setup-line-array-8.html

what to change as resistor ... caps ... ??

Also ... how to setup this one for 20 W ... ?

http://www.diyaudio.com/forums/atta...-hf-x-over-bjt-protect-not-compress-peaks.jpg


Thank you in advance,

Emil

 

[djlivex]

DIY PA speakers line Array

I have been reading your articles from here and other forums, how is the Quasi double 18 sound and can I use Faital Pro 18" Neodymium? And do you have any plots from other woofers? Thanks

 

[apexaudio]

I have been reading your articles from here and other forums, how is the Quasi double 18 sound and can I use Faital Pro 18" Neodymium? And do you have any plots from other woofers? Thanks

Plots from simulator do not have anything common with real life measurements... You can use Faital Pro 18 in Quasi Horn and you can espect 4-6dB greater SPL from 80 to 150Hz compare to bass reflex.
Regards

 

[djlivex]

apex audio can you recommend a nice Faital neo 18" for this Double 18" Quasi horn? With mid Qts. like Qts .31? Thanks!

 

[apexaudio]

Dual 12 inch top

 

[apexaudio]

Horn plan for 12 inch.

 

[HumbleDeer]

Horn plan for 12 inch.

Eh I don't mean to be rude but.. What kind of program did you use for THAT?

The panels aren't connected or square drawn, and the measurements aren't put in place properly.

If you can get me some more measurements I can make a flat drawing and 3D view in my V20 version of Solid Edge.

 

[apexaudio]

BH18

 

[sanbadgujar]

MB-Sub plans

Is all Dimension in MM

 

[apexaudio]

Is all Dimension in MM

Yes

 

[suryadi5417]

APEX C18 subs

Need the schema please...
Regards

 

[QQ12e5k1]

Single 12

Bass 2x12inch + mid 4x6inch + 2inch HF driver

Any plans for 1x12 inch + 2x6 inch+ 1x1 inch?


Regards

 

[QQ12e5k1]

Detail

26+26l 12inch bandpass + 8l 8inch midle

Can you give the detail for this plans?

Regards