Go Back   Home > Forums > > > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Optics Anything from lenses to polarizors

Pure Evoke Flow Internet Radio
Pure Evoke Flow Internet Radio
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 20th December 2017, 01:51 PM   #221
AJSDyno is offline AJSDyno
Pure Evoke Display Supplier
diyAudio Member
 
Join Date: Nov 2017
Location: UK
Pure Evoke Flow Internet Radio
Quote:
Originally Posted by elecroly View Post
Hi AJSdyno,
Just to say the two displays have safely arrived.
Many thanks for making that happen. Now I'm trying to find time to do the swap.
You are welcome, glad they arrived OK!
  Reply With Quote
Old 21st December 2017, 07:34 PM   #222
dplb0051 is offline dplb0051
diyAudio Member
 
Join Date: Dec 2017
Default Another spare part

Hi there
Would it be possible to joint the waiting list for a spare display part for Pure Flow?

Cheers
  Reply With Quote
Old 22nd December 2017, 12:36 AM   #223
AJSDyno is offline AJSDyno
Pure Evoke Display Supplier
diyAudio Member
 
Join Date: Nov 2017
Location: UK
Pure Evoke Flow Internet Radio
Quote:
Originally Posted by dplb0051 View Post
Hi there
Would it be possible to joint the waiting list for a spare display part for Pure Flow?

Cheers
Only 2 remaining, I have reserved one for you and sent you a PM :-)
  Reply With Quote
Old 23rd December 2017, 03:33 PM   #224
AJSDyno is offline AJSDyno
Pure Evoke Display Supplier
diyAudio Member
 
Join Date: Nov 2017
Location: UK
Pure Evoke Flow Internet Radio
Default New orders

For anyone wanting a display, I will continue to supply while there is still demand but please refer to this thread in the group buy section for latest news on availability as I will no longer be monitoring this thread:-

Pure Evoke/Avanti Flow - New Display Module

Cheers!

Last edited by AJSDyno; 23rd December 2017 at 03:36 PM.
  Reply With Quote
Old 17th January 2018, 11:24 PM   #225
Aluicious is offline Aluicious
diyAudio Member
 
Join Date: Jan 2018
Many thanks for very useful pointers.

I've got the part (from nice Italian on eBay) but I'm making a horlicks of getting the front grille off: when you say you ran a knife around the grille, that the plastic mounting in which the metal grille is embedded (not the metal bit itself?) - was there anything special about the knife (I can get a kitchen knife around it and open a gap between the inner and the outer plastic rims but all I'm doing is cracking off the ornamental black plastic, which is breaking off in bits...).
  Reply With Quote
Old 22nd January 2018, 01:35 PM   #226
OxfordDownings is offline OxfordDownings  Albania
diyAudio Member
 
Join Date: Oct 2017
Default Instructions for changing screen on a Pure Evoke Flow

There seems to be some confusion about method. Go in from the back, not the front!! Here's my reposted instructions from 13th November...
Good luck

Quote:
Originally Posted by OxfordDownings View Post
So I've just done our radio, having received a screen from NomadUK, and it's perfect - as good as new: dimming automatically when required but perfectly bright when needed.

Technically I would say the job was a bit fiddly but not difficult as long as you can find a small screwdriver and your reading glasses
So:
1. remove the back plate (six screws)
2. slide the innards out (angle it out right side first)
3. [non-essential] if you'd like to give yourself more room and can reach it then the wire that attaches the inner board to the inside of the radio handle can be unscrewed temporarily
4. note how the screen ribbon cable inserts into the circuit board. (Mine had the numbers 1 and 22 on it which helped.) Your new ribbon will need to go in the same way, obvs.
5. CRITICAL: there is a small black plastic clip which you can see either side of where the ribbon meeds the circuit board. Slide both ends of this up towards the top of the radio, releasing the old ribbon cable
6. remove the four small screws from the screen retainer and remove this and the old screen
7. slide the old ribbon through the letterbox aperture on the screen retainer
8. clean the inside of the radio window
9. remove the screen protector from your new screen and site the new screen (the right way up!)
10. insert the new ribbon cable through the letterbox aperture and set the screen retainer in place
11. replace the four small screws and tighten them evenly
12. reattach the ribbon cable (make sure the black clip is open as you are inserting the ribbon; closing the clip then locks the ribbon in place)
13. [if you detatched the wire from the inside of the radio handle then now is the time to reattach it]
14. replace the board (left side in first) and reinsert the six screws
15. plug it in, wait for it to sort itself out, and then...
16. ...allow yourself a warm smile of self-congratulation. You have saved an old radio from the rubbish bin
17. [OPTIONAL] tune back in to radio 4.

NomadUK and Alampro - thanks for your encouragement! Any comments on my technique welcome for the benefit of those who follow. May God bless you all. Good night!
  Reply With Quote
Old 31st January 2018, 11:03 AM   #227
AJSDyno is offline AJSDyno
Pure Evoke Display Supplier
diyAudio Member
 
Join Date: Nov 2017
Location: UK
Pure Evoke Flow Internet Radio
Default !Get your new display here!

For anyone landing here looking for a new display for their radio:-

Pure Evoke Flow
Pure Avanti Flow
Pure Evoke 1S Marshall
Pure Evoke F4 (uses white display but Evoke Flow yellow display can also be used)

After ordering 5 batches I have now set up a simple web site where anyone can order a display:-

Home

ajsdyno.com/pure/

This will be easier than collecting a list of names and people having to wait until the next batch.

Last edited by AJSDyno; 31st January 2018 at 11:06 AM.
  Reply With Quote
Old 14th February 2018, 09:53 AM   #228
rholmes is offline rholmes
diyAudio Member
 
Join Date: Feb 2018
Default Avanti flow display

Hi sorry to bother but has anyone a spare Avanti Flow display available as my one has just about died?
  Reply With Quote
Old 14th February 2018, 10:10 AM   #229
AJSDyno is offline AJSDyno
Pure Evoke Display Supplier
diyAudio Member
 
Join Date: Nov 2017
Location: UK
Pure Evoke Flow Internet Radio
Hi, I have new stock arriving today (Wednesday 14th February).

You can order one from AJSDyno.com/pure and it will be posted today.

Regards,

AJSDyno
  Reply With Quote

Reply


Pure Evoke Flow Internet RadioHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Internet Radio vs Broadcast Radio - Bandwidth ? Bigun Digital Source 13 6th December 2015 01:54 PM
HQ internet radio stations and playback marcelnl PC Based 0 22nd April 2012 10:19 AM
HD radio vs Internet streaming jfitz57 Digital Source 8 7th September 2011 01:06 AM
Internet radio: your favorites Netlist Music 51 3rd March 2008 09:47 PM


New To Site? Need Help?

All times are GMT. The time now is 05:13 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki