3-way Scan-Speak

[marvii]

I am looking for a 3-way scheme with SS D2904/7000-00 + 12m/4631g00 + any woofer (not midwoofer). Please help.

 

[FullThrottleRic]

Not exactly the drivers you want but the Ekta is well thought of...

http://www.troelsgravesen.dk/Ekta.htm

 

[marvii]

I have already considered Ekta and I think that 18W/8531-G00 - good Midwoofer, but not very good for bass.
Another scheme?

 

[FullThrottleRic]

You could always add a Peerless XLS or similar as an active sidefiring woofer if you wanted more bass.

How low do want it to go and how loud? The 18W gets down to about 40Hz no problem with reasonable power handling so long as you keep the level fairly sensible. If you're going to use it for HT you can send all the really low stuff to the sub

 

[LaMa]

Scanspeak 26W metal cone is a very decent bass driver. I have no 3-way design with scanspeak 12M/ 7000 though . I think you have to measure/ model this design yourself.

 

[Mingo]

Try this:

www.humblehomemadehifi.com/Diary.html

 

[banana]

I've used the SS 12M, paired with XT25 and 8565-01.

I measured the 12M quite close to the published spec, an easy to use mid.

http://www.diyaudio.com/forums/showthread.php?s=&threadid=76176

 

[marvii]

I am going to use it only for the music and I do not want sub. I love all music including hard rock, pop, rap, therefore, I wish to powerful bass. And Ekta will be sufficient to my room(32m2)?

I need proven scheme.

It really no scheme with 12m+7000+woofer ?

 

[Brachy]

I built the Ekta in recent week. In my > 50m2 room, this pair perform excellent! The bass performance is over than I expected!

 

[marvii]

I found Vivace SE ( D3004/6600.00 or D2904/7100.03 ,12M4831G00 or 12M4531G00 and 25W8567.SE )( http://www.audiocomponents.nl/speakers/new/index.htm ). I will be wait scheme.
What you think about it?