accuton c23&c92

Paulus1981 · 10th March 2007, 08:25 AM

Could anybody help me with ZMA and FRD files of the Accuton C23/8 tweeter and C92/6 woofer.

I'm trying to make an small 2way monitor supported by two Seas L26 subs, everything powered by Hypex Ucd400 amps

Any help will really be appreciated!

tinitus · 10th March 2007, 11:06 AM

http://www.clofis.nl/nl/thiel/thiel.htm

Is there anything usefull there ?

Paulus1981 · 10th March 2007, 11:15 AM

http://www.pvconsultants.com/audio/frdis.htm

this is what I need, I know that I should measure the units myself in my specific cabinet; and that's going to happen. But I would like to make a preliminary filter based on that very handy speakerworkshop excelsheet

Tenson · 10th March 2007, 11:23 PM

Get a program called SPLTrace and you can trace the manufactures data on the driver. If they tell you the conditions it was measured under you can then manipulate the data for the type of box, baffle and so on that it might be loaded in.

10th March 2007, 08:25 AM	#1
Paulus1981 diyAudio Member Join Date: Dec 2005 Location: Lekkerkerk	accuton c23&c92 Could anybody help me with ZMA and FRD files of the Accuton C23/8 tweeter and C92/6 woofer. I'm trying to make an small 2way monitor supported by two Seas L26 subs, everything powered by Hypex Ucd400 amps Any help will really be appreciated! __________________ hypex UcD400 HG - Accuton C23 & 92 - Dayton RSS or Peerless SLS in dipole

10th March 2007, 11:15 AM	#3
Paulus1981 diyAudio Member Join Date: Dec 2005 Location: Lekkerkerk	http://www.pvconsultants.com/audio/frdis.htm this is what I need, I know that I should measure the units myself in my specific cabinet; and that's going to happen. But I would like to make a preliminary filter based on that very handy speakerworkshop excelsheet __________________ hypex UcD400 HG - Accuton C23 & 92 - Dayton RSS or Peerless SLS in dipole

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
wtb Accuton C95-T6	nyatt	Swap Meet	1	3rd June 2008 05:36 PM
Two way, using Accuton C95-T6 & C23-6	acoustic_design	Multi-Way	10	16th March 2007 10:27 PM
Accuton C89	dsrviola	Multi-Way	1	7th August 2006 07:35 AM
Accuton rec's?	brucemck2	Multi-Way	1	29th September 2005 06:29 PM
Accuton C2-90/T6	Geenius	Multi-Way	30	22nd September 2005 07:28 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

10th March 2007, 11:06 AM	#2
tinitus diyAudio Moderator Join Date: Nov 2005	http://www.clofis.nl/nl/thiel/thiel.htm Is there anything usefull there ?

10th March 2007, 11:23 PM	#4
Tenson diyAudio Member Join Date: Feb 2006 Location: Kent	Get a program called SPLTrace and you can trace the manufactures data on the driver. If they tell you the conditions it was measured under you can then manipulate the data for the type of box, baffle and so on that it might be loaded in.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)