|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Multi-Way Conventional loudspeakers with crossovers |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
6th March 2007, 01:00 AM
|
#1 |
|
diyAudio Member
Join Date: Feb 2003
Location: New Zealand
|
JustMLS impedance anomaly
All my JustMLS impedance readings are 1 ohm too high.
Attached is the impedance calibration file. Both signals line up perfectly. But when I test resistors they all read approx 1 ohm higher than their true value, which I've checked with my meter. My test setup is exactly as specified in the JustMLS manual. Anyone suffered from this problem? Any clues? |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Wallin II jig with JustMLS? | Mos Fetish | Multi-Way | 2 | 9th December 2008 05:53 AM |
| Looking for some help with JustMLS | JonW | Multi-Way | 7 | 16th April 2007 09:03 PM |
| LL1660S Anomaly | arnoldc | Tubes / Valves | 17 | 3rd May 2006 01:00 AM |
| JustMLS problem | a007udio | Multi-Way | 4 | 18th July 2005 08:49 PM |
| TAD TL-1102 response anomaly? | Alidore | Multi-Way | 0 | 27th January 2004 04:54 AM |
| New To Site? | Need Help? |
| Page generated in 0.06676 seconds (64.77% PHP - 35.23% MySQL) with 11 queries |
