Need Cabinet for old mission driver's (Vifa)

[fin1bxn]

I have some new old stock Mission drivers from the early 90's
Tweeter is a 1" dome - 5 layer laminated with a die cast plate about 3" x 5"

Woofer - 8" clear poly (I think this was a replacement for 770's mkII

I'm looking for the best speaker cabinet design and crossover at 2.5 to 2.8Hz

I had built a Box 3/4" (19hx10wx11D) no bracing with a 2 way boston accoustics x-over.
They sound very revieling and disapear with great imaging and blend very well with my sub, but they are bright and sound like something is missing...dont go low at all.
Thats why I'm looking for a better cabinet and x-over.
I'm pretty sure they were Vifa drivers.
Happy New year to all and Thanks
Bob

[Cal Weldon]

Hi Bob,

Any other info on the drivers? Without knowing the parameters we'd just be guessing.

[fin1bxn]

no other info,,,except the original cabinets for those drivers were about 47 liter...

I'm willing to experiment...maybe a transmition line for 8" or some meadowlark clone....design..