Amplifier's impedance effect on XO - Page 2

roddyama · 30th December 2006, 05:31 AM

Quote:

Originally posted by K-amps

Thanks.

Will the affect only be attenuation at that freq? Or will it affect the XO point, thats all I need to know, Will it change the XO frequency?

It will depend on the output of the amp you are using, but for 8ohms, it probably will be fine with no attenuation in the audio range.

K-amps · 30th December 2006, 05:32 AM

Thats what I wanted to know :-)

I might design 3 tweets in parallel and then insert a 2 ohm in series with the amp to save it from burning up... need 3 to match the spl of the mids + better power handling.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Effect of amplifier slew rate on planars.....	ashok	Planars & Exotics	4	8th March 2008 12:43 AM
Effect of tweeters on ohm impedance?	Flyin11	Car Audio	3	28th February 2008 05:46 AM
Effect pedals vs amplifier EQ.	moo	Instruments and Amps	4	26th November 2007 03:01 AM
Tweeter impedance and crossover effect - Wharfedale Evo 30	lastig	Multi-Way	1	29th January 2007 01:54 PM
Shunt Feedback - effect on input impedance	gingertube	Tubes / Valves	12	6th December 2004 11:04 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

30th December 2006, 05:32 AM	#12
K-amps diyAudio Member Join Date: Nov 2003 Location: Indiana	Thats what I wanted to know :-) I might design 3 tweets in parallel and then insert a 2 ohm in series with the amp to save it from burning up... need 3 to match the spl of the mids + better power handling.