|13th December 2006, 07:53 AM||#21|
Join Date: Mar 2005
I think I made it clear that the subwoofer AMP is very important and needs quite some power to drive the low-end down from 50Hz. For the upper end around 60-100 Hz and not to forget throughout the whole crossover area, i'd say, up to 2 octaves above the crossover point the amp-quality should be as good as you have it for the mids and highs. Otherwise the sound quality will suffer heavily in this very important area of 100-400Hz.
This is one of the main points why I refered to the 4 channel T-amp module. Perhaps going for the 8 channel module would give even better options. 2*2 for the subs, 1 each for highs and mids.
Your peerless woofers, do have a low sensivity, below 90db/SPL if I recall it right, and that's a complete different story. They need quite some juice to start moving at all in the low end!
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|My open baffle dipole with Beyma TPL-150||StigErik||Multi-Way||1469||18th May 2015 06:38 PM|
|Open baffle/ dipole design help||Infinity buff||Multi-Way||3||12th April 2006 03:19 AM|
|New Open Baffle Dipole Pics||PaulHilgeman||Multi-Way||25||27th April 2004 04:43 PM|
|Open baffle (dipole) bass problem||Volenti||Multi-Way||16||22nd September 2003 03:55 AM|
|New To Site?||Need Help?|