Line Array project for those Pioneer 50 cent speakers

[loninappleton]

I was one of those people who bought the Pioneer 50 cent
speakers to make line arrays some time ago.

I made the baffle board, cut the 8 holes per baffle and did the
wiring with some help. Thankfully I found the diagram.

Now I intend to cut down that baffle boards with
one and a half inch trim from the hole cutout edge
and make some sides and a back to stand a total of
four feet high in some sort of cabinet ply or birch ply.

Jim Griffin or others, can you suggest some measures
to get these finished off? I recall seeing the project by
Bill Fitzmaurice for these but that is a lot of angle
cutting and mounting tricks.

These should just be floor standers-- maybe with
my first practice installation of electronic parts or a
bargain tweeter.


I'll go look up the Parts Express item number now that
I can get to PE again.

No luck at PE. The Speaker is marked

10-1028LA/XCN.

On my search I saw they were being offered on Ebay
starting bid of $3.99 each. Oh brother.

Any help appreciated with this.