|Multi-Way Conventional loudspeakers with crossovers|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|7th November 2006, 07:40 PM||#1|
Join Date: May 2005
Location: Eastern Shore, Maryland
Bass Guitar Cab Conundrum
This was originally posted over in "Musical Instruments," but I am not sure that is its home. Perhaps here of "Full Range?"
I have a pair of drivers with the following T/S numbers as supplied by Eden for their 10" drivers (thank you Eden):
Fs = 43Hz
Znom = 4 ohm
Re = 2.2 ohm
Qts = 0.16
Qms = 3.26
Qes = 0.17
SPL = 97 dB/W
Sd = 0.034 m^2
BL = 10.08 T-M
Le = 9.2 E-04 H
Vas = 2.75 ft^3
What the Eden cabs look like/spec as and what I come up as a start in WiniSD do not match. What should I be looking at for a single driver enclosure?
I will be adding a tweeter for extension, which will also resolve my requirement for 8 ohm loads. This will end up being a pair of small cabs (I hope) for portability...and closet-ability as not to clutter the family room with gear.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Bass guitar amp||billr||Instruments and Amps||3||23rd August 2009 09:37 AM|
|4x12 Guitar cab using guitar and bass speakers help||andrewskaterrr||Instruments and Amps||15||23rd April 2009 11:43 PM|
|DIY Guitar/Bass/Anything amp!||Christovftw||Solid State||0||7th February 2009 08:26 PM|
|any electric bass players? im building a bass guitar cab||KOA||Instruments and Amps||27||30th April 2007 03:49 PM|
|New To Site?||Need Help?|