Source -> DEQ ->DCX ->Master Volume
This of course means that you need a multi-channel volume control, but this setup will preserve resolution as long as possible.
This of course means that you need a multi-channel volume control, but this setup will preserve resolution as long as possible.
Pardon my ignorance, I'm not disputing you, but how does this sequence better preserve resolution
Its not only about resolution, its about practicality and rationality - or do you want to eq each two channels seperately, meaning to purchase three deq's for three way active setup?
The deq corrects the the roomresponse for the full spectrum, this then you divide via the dcx into two or three bands. The dcx also does the time alignment, if you run sub/sat configuration.
You want the master volume control last, so you can run in the digital domain with full gain, thus having the highest resolution there - keeping the bit count up.
The deq corrects the the roomresponse for the full spectrum, this then you divide via the dcx into two or three bands. The dcx also does the time alignment, if you run sub/sat configuration.
You want the master volume control last, so you can run in the digital domain with full gain, thus having the highest resolution there - keeping the bit count up.
Plus, running all digital from your source through the processors(I assume that you're using a dvd player) will get the most out of those processors.
- Status
- Not open for further replies.
- Home
- Loudspeakers
- Multi-Way
- Behringer XO sequence