Usher 8137A on sale for $45.

polkymon · 26th September 2006, 12:31 AM

$20 off

http://www.partsexpress.com/pe/showd...number=296-616

Been looking at this one for awhile. Please chime in with any comments on this driver.

boogs · 26th September 2006, 01:04 PM

I recently purchased a pair based on the recommendations of a number of people at the PartsExpress board. There's a fellow over there who has used it successfully with a 10" passive radiator in a three way system. He recommends crossing it over fairly low as there's some ugly business happening just below 1K - it could be corrected but i'm thinking that woofer's forte is low to midbass.

I'm designing a 3 way with additional subwoofer utilizing the Usher for midbass, likely to crossover around 400Hz to the midrange driver.

HTH's

Scott

26th September 2006, 12:31 AM	#1
polkymon diyAudio Member Join Date: Jun 2005 Location: usa	Usher 8137A on sale for $45. $20 off http://www.partsexpress.com/pe/showd...number=296-616 Been looking at this one for awhile. Please chime in with any comments on this driver.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Drivers for Sale - Scan-Speak,Vifa,Usher,more!	Bigalva	Swap Meet	2	15th September 2008 05:01 PM
Usher 10's and 7's	Lucidity	Swap Meet	2	24th April 2008 02:09 AM
WTB 3 qty Usher T-9950 & Usher Qty 1 - 8845	markmelheim	Swap Meet	1	17th May 2006 10:15 PM
usher km-u2	qubix	Multi-Way	3	9th March 2006 06:56 PM
Usher 2.5 DIY Kit	JCD	Multi-Way	2	8th September 2005 09:27 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

26th September 2006, 01:04 PM	#2
boogs diyAudio Member Join Date: Nov 2003 Location: Ontario, Canada	I recently purchased a pair based on the recommendations of a number of people at the PartsExpress board. There's a fellow over there who has used it successfully with a 10" passive radiator in a three way system. He recommends crossing it over fairly low as there's some ugly business happening just below 1K - it could be corrected but i'm thinking that woofer's forte is low to midbass. I'm designing a 3 way with additional subwoofer utilizing the Usher for midbass, likely to crossover around 400Hz to the midrange driver. HTH's Scott

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)