Crossover Help SEAS CA12RCY Vifa DX25

Uncle Mike · 14th September 2006, 04:14 AM

Hi there..

Fisst up I am a new to speaker building and this will be my first project.

I already have the drivers Seas CA12RCY and Vifa DX25 and I would like to build a small monitor of around 4.6 litres, similar to the Proac Tabblette Reference 8 which also uses these drivers. I Dont know what the crossover for the proacs is but there is a similar design on Troels site here http://www.troelsgravesen.dk/W11XT.htm but this uses the Seas W11CY001 . Info on this crossover can be seen here http://www.fotoimpact.com.au/C12.jpg

I am wondering can I just use this crossover or do I need to modify it for the CA12RCY driver and if so what modifications are suggested? Or does anyone know the design of the proac crossover?

Any help would be much appreciated..

Cheers,
Mike

tktran303 · 14th September 2006, 05:35 AM

No of course not.

In case you missed it-

http://www.troelsgravesen.dk/sorry_cannot.htm

FAQ #101

Quote:

Sorry, you cannot-
use any of the shown crossover schematics with any other than the specified drivers.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Little help needed - Vifa MG18 + Vifa DX25 - 2.5way	guitvinny	Multi-Way	12	10th May 2009 10:18 PM
New 2-way design using Vifa DX25 tweeter	BlackUnikorn	Multi-Way	0	11th February 2008 06:00 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

14th September 2006, 04:14 AM	#1
Uncle Mike diyAudio Member Join Date: Jul 2006	Crossover Help SEAS CA12RCY Vifa DX25 Hi there.. Fisst up I am a new to speaker building and this will be my first project. I already have the drivers Seas CA12RCY and Vifa DX25 and I would like to build a small monitor of around 4.6 litres, similar to the Proac Tabblette Reference 8 which also uses these drivers. I Dont know what the crossover for the proacs is but there is a similar design on Troels site here http://www.troelsgravesen.dk/W11XT.htm but this uses the Seas W11CY001 . Info on this crossover can be seen here http://www.fotoimpact.com.au/C12.jpg I am wondering can I just use this crossover or do I need to modify it for the CA12RCY driver and if so what modifications are suggested? Or does anyone know the design of the proac crossover? Any help would be much appreciated.. Cheers, Mike __________________ First time Speaker builder

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)