diy impedance question

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
hi, i have made a pair of loudspeakers and i have a 4 Ohm DVC sub wired in series, two 4 Ohm mid-bass wired in series and two 4 Ohm tweeters. My amp can handle 8-16 Ohms so i was wondering wuld it b possible to leave 1 4 Ohm tweeter in and replace the other with an 8 Ohm mid and leave their wiring as normal?
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.