Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

How to test the Hammer Dynamics crossover?
How to test the Hammer Dynamics crossover?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 10th December 2002, 04:08 AM   #1
Xylenz is offline Xylenz
diyAudio Member
 
Join Date: Oct 2002
Location: bellevue, wa
Question How to test the Hammer Dynamics crossover?

I have wired up the crossover components to the super 12 on small cardboard squares so that each square represents one of the numbered components on the third last page of the manual. There are five per speaker if you include #5&6 across the driver terminals. I would like to test each of the values of these components with my DMM to make sure that my soldered connections are correct. However, I dont know what I should be testing for. Could one of you help a rank newbie by telling me what to measure on each component to make sure that they are correctly connected. This will also help me diagnose problems in the future.

components:
#3 parallel 4x47ohm & 30 ohm resistors
#4 parallel 7.5uF, 1uF, & 0.1uF capacitors
#7 parallel 1.8uF & 0.1uF capacitors
#9 parallel 4.7uF & 0.1uF capacitors
#5-6 serial 6.8 ohm resistor to a 10uF capacitor

Thanks enormously.
  Reply With Quote

Reply


How to test the Hammer Dynamics crossover?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Hammer Dynamics Super 12 select kit bbaker6212 Swap Meet 6 8th November 2008 03:52 PM
How do I test my crossover? mefff Multi-Way 8 24th October 2006 07:30 AM
Hammer Dynamics gchrist Multi-Way 7 6th March 2006 03:48 PM
Hammer Dynamics Super12 FT17H upgrade luigi Multi-Way 4 22nd September 2004 06:53 AM
What's the impedance curve tor the Hammer Dynamics? Xylenz Multi-Way 2 7th November 2002 08:41 PM


New To Site? Need Help?

All times are GMT. The time now is 10:04 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki