Scan Speak Reference Monitor SE

andrew01 · 27th July 2006, 11:27 AM

Anyone know where to find the crossover for this speaker
see below URL:

http://audiocomponents.nl/speakers/s...erence_eng.htm

Thanks
Andrew

sreten · 27th July 2006, 11:35 AM

Hi,

is the SE part just a slanted baffle for lower stands ?

/sreten.

andrew01 · 27th July 2006, 11:44 AM

Different design with different drivers....

deaf monkey · 27th July 2006, 12:48 PM

Okay, I think you're in luck. I suspected they may have originally put the crossover drawing up, and have since removed it, and this seems like it is the case.

If you go to the internet archive at http://www.archive.org/index.php and paste your original URL in:
audiocomponents.nl/speakers/scanspeak/reference/scanspeak-reference_eng.htm
...and then hit the Take Me Back button, you will see the page as it was in March 2005, complete with the extra drawing of your crossover.

deaf monkey · 27th July 2006, 12:48 PM

(Bump)
Edit: On careful viewing, they've changed the design on that one ,so not much use to you. Darn, I thought I was being too clever for myself!

Taco · 27th July 2006, 06:32 PM

Quote:

Originally posted by andrew01
Anyone know where to find the crossover for this speaker
see below URL:

http://audiocomponents.nl/speakers/s...erence_eng.htm

Thanks
Andrew

This design is almost finished, when it's done I think it will be added to the website.

keyser · 28th July 2006, 12:31 AM

You could email the designer, Rolph Smulders, at: info AT audiocomponents DOT nl

27th July 2006, 11:27 AM	#1
andrew01 diyAudio Member Join Date: May 2003 Location: Adelaide Southern Suburbs	Scan Speak Reference Monitor SE Anyone know where to find the crossover for this speaker see below URL: http://audiocomponents.nl/speakers/s...erence_eng.htm Thanks Andrew

28th July 2006, 12:31 AM	#7
keyser diyAudio Member Join Date: Oct 2004 Location: The Netherlands	You could email the designer, Rolph Smulders, at: info AT audiocomponents DOT nl __________________ "Convictions are more dangerous enemies of truth than lies" - Friedrich Nietzsche Cardioid-like + Waveguide 2-way

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Scan Speak Reference Plus help!	Egen	Multi-Way	38	19th November 2007 01:14 AM
Scan-Speak Reference Monitor	gchrist	Multi-Way	37	10th April 2007 10:46 PM
bass unit to form a 3-way system with Scan-Speak Reference Monitor	keyser	Multi-Way	42	29th October 2005 02:31 AM
Scan Speak Reference Monitor	keyser	Multi-Way	7	13th September 2005 04:35 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

27th July 2006, 11:35 AM	#2
sreten diyAudio Member Join Date: Nov 2003 Location: Brighton UK	Hi, is the SE part just a slanted baffle for lower stands ? /sreten.

27th July 2006, 11:44 AM	#3
andrew01 diyAudio Member Join Date: May 2003 Location: Adelaide Southern Suburbs	Different design with different drivers....

27th July 2006, 12:48 PM	#4
deaf monkey diyAudio Member Join Date: Jun 2004 Location: Adelaide, Australia	Okay, I think you're in luck. I suspected they may have originally put the crossover drawing up, and have since removed it, and this seems like it is the case. If you go to the internet archive at http://www.archive.org/index.php and paste your original URL in: audiocomponents.nl/speakers/scanspeak/reference/scanspeak-reference_eng.htm ...and then hit the Take Me Back button, you will see the page as it was in March 2005, complete with the extra drawing of your crossover.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)