Go Back   Home > Forums > Loudspeakers > Multi-Way

Multi-Way Conventional loudspeakers with crossovers

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 29th September 2001, 08:33 AM   #1
diyAudio Member
 
Join Date: Apr 2001
Location: UK
Hi,

I have a very elderly pair of bookshelf loudspeakers (Wharfdale Diamond III). One of the boxes is not operational. I would like to ressurect it so I could use them for testing purposes. Would a more decent crossover bring out a more decent performance or would I be wasting my cash?(!). This would be my first step into loudspeakers
and would appreciate some advice.

Many Thanks.


Brownlow
  Reply With Quote
Old 29th September 2001, 04:00 PM   #2
Super is offline Super  United States
diyAudio Member
 
Join Date: May 2001
Location: Connecticut
Send a message via AIM to Super
This is a question that occurs quite often around here. If you want to make a suitable cabinet for replacement, then you need to know the original cabinet volume and port lengths, or the T/S parameters of the drivers themselves. As for the crossovers, well, unless you know the drivers' parameters, its a lost cause. If you have some deep sentimental ties to the speakers, then you could try and ressurect them. However, I, and probably several others around here would advise against it, considering how you can build an excellent pair of cost-efficient bookshelfs nowadays that are likely to outperform those. The choice is up to you. Good luck.
__________________
Bryan
  Reply With Quote
Old 29th September 2001, 04:07 PM   #3
diyAudio Member
 
Join Date: Feb 2001
Location: Columbia, SC
Would I be correct in assuming that'not operational' means a blown driver, or perhaps one with a rotted surround? It's rare for a crossover to give up the ghost, leaving functional drivers orphaned in its wake.
If it's the crossover, you can rehabilitate it relatively cheaply. By all means, do so. Use better quality parts if you wish, but don't change the values.
If it's a dead driver, you're going to have a tougher time of it. Contact the manufacturer and see if by chance they have a replacement driver. Otherwise, you're toast.

Grey
  Reply With Quote
Old 29th September 2001, 06:44 PM   #4
diyAudio Member
 
Join Date: Apr 2001
Location: UK
It is a dead bass driver and I guess it really was cash and sentimental reasons. I think I better put that idea to bed.
It is a bit of a shame but seems to be the most sensible course to take.

Thank you for your patience.

Brownlow
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
getting to test many speakers for FR mcmahon48 Multi-Way 17 30th April 2009 02:01 PM
Looking for Other FR Speakers to test. samsagaz Full Range 37 3rd February 2009 08:07 AM
How to test speakers? zaydenam Multi-Way 2 27th August 2008 01:02 PM
How To Effectively Test Speakers? Help PLEASE! Wassim Multi-Way 4 4th August 2004 05:24 PM
Test speakers? Ryssen Multi-Way 3 2nd March 2004 10:54 PM


New To Site? Need Help?

All times are GMT. The time now is 03:08 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright Đ1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2