SpeakerWorkshop MLS measurement??

kimschips · 20th June 2006, 05:10 AM

Hey.

I got this:

WM-61A mike
Behringer Mic100 preamplifier
Soundblaster Audigy 2 ZS soundcard
Speakerworkshop

Do some off you know how to measure MLS->Frequence responce off an loudspeaker in Speakerworkshop?

Where in the program do I activate and what parameter to choose in the program?

Bedst regards
Kim

owdi · 20th June 2006, 06:04 AM

Get ready for a lot of reading, Speaker Workshop has a steep learning curve. Start by reading the sample project on the website.

http://www.speakerworkshop.com/SW/Project/Main.htm

For quicker results, try Arta. Much easier to learn, and very useful.

http://www.fesb.hr/~mateljan/arta/

Dan

claudio · 20th June 2006, 07:31 PM

Hello,
a Speaker Workshop tutorial is available in my Hp: http://www.claudionegro.com ; an Unofficial Manual (vers. 2), by Jay Butterman, is also available in my HP, in the download folder.

Regards,
Claudio

kimschips · 21st June 2006, 05:04 AM

Hello both off you

Thank you so much will soon try out.

By the way: do you know what the tones are called in WinMls which start from low frequency and goes up until let´s say 20Khz?

Can it be found and put in another program? (frequency responce)

Best regards
Kim

20th June 2006, 05:10 AM	#1
kimschips diyAudio Member Join Date: Dec 2004 Location: Denmark	SpeakerWorkshop MLS measurement?? Hey. I got this: WM-61A mike Behringer Mic100 preamplifier Soundblaster Audigy 2 ZS soundcard Speakerworkshop Do some off you know how to measure MLS->Frequence responce off an loudspeaker in Speakerworkshop? Where in the program do I activate and what parameter to choose in the program? Bedst regards Kim

20th June 2006, 07:31 PM	#3
claudio diyAudio Member Join Date: Feb 2002 Location: Italy	SW tutorial and Manual Hello, a Speaker Workshop tutorial is available in my Hp: http://www.claudionegro.com ; an Unofficial Manual (vers. 2), by Jay Butterman, is also available in my HP, in the download folder. Regards, Claudio

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FFT size in SpeakerWorkshop	jm_kzo	Multi-Way	2	9th July 2008 07:48 AM
Impedance measurement jig for SpeakerWorkshop	Tenson	Multi-Way	10	24th November 2007 10:56 PM
Speakerworkshop question	kro5998	Multi-Way	2	25th June 2006 06:18 PM
SpeakerWorkshop again	Dave Jones	Multi-Way	19	17th June 2004 05:34 PM
speakerworkshop, meaning of L1 and R1?	capslock	Multi-Way	9	5th June 2003 07:55 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

20th June 2006, 06:04 AM	#2
owdi diyAudio Member Join Date: Sep 2003 Location: Bellevue, WA	Get ready for a lot of reading, Speaker Workshop has a steep learning curve. Start by reading the sample project on the website. http://www.speakerworkshop.com/SW/Project/Main.htm For quicker results, try Arta. Much easier to learn, and very useful. http://www.fesb.hr/~mateljan/arta/ Dan

21st June 2006, 05:04 AM	#4
kimschips diyAudio Member Join Date: Dec 2004 Location: Denmark	Hello both off you Thank you so much will soon try out. By the way: do you know what the tones are called in WinMls which start from low frequency and goes up until let´s say 20Khz? Can it be found and put in another program? (frequency responce) Best regards Kim

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)