HELP! Need a PE 299-752 3" Sammi Buyout

Lance · 12th May 2006, 01:35 PM

Need a 299-752 3" (4Ohm)Sammi Buyout driver.
Just finished a 7 channel MMTMM for my niece/nephews design and one of the drivers were dead out of the box.
I usually buy some extras but somehow failed to do so on this purchase and , of course, they are all gone.
I really need one badly but will be willing to buy more (so I finally have some extra's)
Can anyone help
Thanks
Lance

Cal Weldon · 12th May 2006, 03:14 PM

Hi Lance. I noticed there's no pic of the driver at PE anymore. Which Sammi driver is it?

Lance · 13th May 2006, 01:03 AM

Its a 3 inch paper cone, foam surround with a pincushion type frame........can you help :-)
Thanks lance

Lance · 15th May 2006, 12:24 PM

desparate bump

Cal Weldon · 15th May 2006, 11:41 PM

Does it look like this?

If so, contact Q components here in Canada to see if it's still available

1-800-363-6336

Lance · 16th May 2006, 11:49 PM

The driver appears much the same physically, sans sheilding cup.
But the TS parameters appears substantially different.......however, I'm keeping the info as a last ditch effort
Thanks very much for the help and effort

lance

Cal Weldon · 17th May 2006, 01:05 AM

Lance, You might want to call them anyway to see if they might have the driver you are looking for. Too bad it's not the same one.

actually why not email?

sales@loudspeakers.ca

Lance · 17th May 2006, 10:26 AM

will do...thanks again

12th May 2006, 01:35 PM	#1
Lance diyAudio Member Join Date: Jul 2003 Location: atlanta	HELP! Need a PE 299-752 3" Sammi Buyout Need a 299-752 3" (4Ohm)Sammi Buyout driver. Just finished a 7 channel MMTMM for my niece/nephews design and one of the drivers were dead out of the box. I usually buy some extras but somehow failed to do so on this purchase and , of course, they are all gone. I really need one badly but will be willing to buy more (so I finally have some extra's) Can anyone help Thanks Lance

12th May 2006, 03:14 PM	#2
Cal Weldon Speakerholic diyAudio Moderator Join Date: Jan 2004 Location: British Columbia	Hi Lance. I noticed there's no pic of the driver at PE anymore. Which Sammi driver is it? __________________ Next stop: Margaritaville Some of Cal's stuff \| Cal Weldon Consulting

17th May 2006, 01:05 AM	#7
Cal Weldon Speakerholic diyAudio Moderator Join Date: Jan 2004 Location: British Columbia	Lance, You might want to call them anyway to see if they might have the driver you are looking for. Too bad it's not the same one. actually why not email? sales@loudspeakers.ca __________________ Next stop: Margaritaville Some of Cal's stuff \| Cal Weldon Consulting

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Vifa TP16WJ 6-1/2" Woofer (PE Buyout)	critofur	Multi-Way	11	9th June 2009 04:44 AM
FS: 2 Sammi Sound 12" Coaxial Drivers (CX-12AW200G)	roger_lew	Swap Meet	1	23rd April 2008 01:24 AM
WTB: 3.5" Black Neo Buyout Drivers	spudfrog	Swap Meet	1	3rd October 2007 03:03 AM
Subwoofer with 10" High Output Buyout	69stingray	Subwoofers	7	6th August 2007 11:59 PM
PE Pioneer 4" buyout project	MPM	Multi-Way	2	29th October 2004 05:56 PM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

13th May 2006, 01:03 AM	#3
Lance diyAudio Member Join Date: Jul 2003 Location: atlanta	Its a 3 inch paper cone, foam surround with a pincushion type frame........can you help :-) Thanks lance

15th May 2006, 12:24 PM	#4
Lance diyAudio Member Join Date: Jul 2003 Location: atlanta	desparate bump

16th May 2006, 11:49 PM	#6
Lance diyAudio Member Join Date: Jul 2003 Location: atlanta	The driver appears much the same physically, sans sheilding cup. But the TS parameters appears substantially different.......however, I'm keeping the info as a last ditch effort Thanks very much for the help and effort lance

17th May 2006, 10:26 AM	#8
Lance diyAudio Member Join Date: Jul 2003 Location: atlanta	will do...thanks again

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read